Emission of volatile organic compounds (VOCs) has resulted in various environmental issues. Therefore, development of effective VOC removal technology is essential for reducing the adverse effects associated. This work provides a systematic review on VOC removal from gas stream via catalytic oxidation, plasma degradation, and plasma catalysis. For catalytic oxidation of VOCs, possible reaction mechanisms and how physicochemical properties of catalyst influences catalytic performance are presented and discussed, followed by plasma removal of VOCs, VOC degradation, and byproduct formation mechanisms. Next, interactions between plasma and catalyst are interpreted for comprehensive understanding. Last, perspectives are provided for further development of VOC removal technology.

Sulfur hexafluoride (SF₆) is an important gas for plasma etching processes in the semiconductor industry. SF₆ intensely absorbs infrared radiation and, consequently, aggravates global warming. This study investigates SF₆ abatement by nonthermal plasma technologies under atmospheric pressure. Two kinds of nonthermal plasma processes—dielectric barrier discharge (DBD) and combined plasma catalysis (CPC)—were employed and evaluated. Experimental results indicated that as much as 91% of SF₆ was removed with DBDs at 20 kV of applied voltage and 150 Hz of discharge frequency for the gas stream containing 300 ppm SF₆, 12% oxygen (O₂), and 40% argon (Ar), with nitrogen (N₂) as the carrier gas. Four additives, including Ar, O₂, ethylene (C₂H₄), and H₂O_(g), are effective in enhancing SF₆ abatement in the range of conditions studied. DBD achieves a higher SF₆ removal efficiency than does CPC at the same operation condition. But CPC achieves a higher electrical energy utilization compared with DBD. However, poisoning of catalysts by sulfur (S)-containing species needs further investigation. SF₆ is mainly converted to SOF₂,SO₂F₄, sulfur dioxide (SO₂), oxygen difluoride (OF₂), and fluoride (F₂). They do not cause global warming and can be captured by either wet scrubbing or adsorption. This study indicates that DBD and CPC are feasible control technologies for reducing SF₆ emissions.