In this Letter, a Ga2O3 vertical Schottky barrier diode (SBD) with self-aligned field plate and mesa termination is fabricated and studied. The combination of field plate and mesa termination can effectively make the electric field distribution uniform in the termination, and thus the proposed SBD features high breakdown voltage (BV). Moreover, to eliminate alignment deviation and simplify the fabrication process, a self-aligned etching process is developed. The experimental results show that a low specific on-resistance of 4.405 mΩ·cm2 and a high BV of 3113 V can be simultaneously derived on the proposed SBD, yielding a high power figure of merit of 2.2 GW/cm2. Meanwhile, a considerably low forward voltage of 1.53 V at 100 A/cm2 is also achieved, demonstrating the low conduction loss of the device.
21 April 2025 in The Journal of Physical Chemistry Letters
In this Letter, a high-quality and high-resistivity nitrogen (N)-doped Ga2O3 current blocking layer (CBL) is grown utilizing metal-organic chemical vapor deposition homoepitaxial technology. By using nitrous oxide (N2O) as oxygen source for Ga2O3 growth and N source for doping and controlling the growth temperature, the grown CBL can effectively achieve high (∼1019 cm−3) or low (∼1017 cm−3) N doping concentrations, as well as high crystal quality. Furthermore, the electrical properties of the developed CBL are verified at the device level, which shows that the device using the CBL can withstand bidirectional voltages exceeding 3.5 kV with very low leakage (≤1 × 10−4 A/cm2). This work can pave the way for the realization of high-voltage and low-leakage Ga2O3 vertical devices, especially metal-oxide-semiconductor field effect transistors.
The precise control of acceptor doping concentrations in epilayers is critical for fabricating key β-Ga2O3-based power electronic structures, including current-blocking layers, p-type epilayers, and drift layers. Unintentional nitrogen (N) compensating dopants introduced by N2O (a common oxygen precursor) during β-Ga2O3 metalorganic chemical vapor deposition growth significantly affects electrical properties. This study demonstrates that N concentration in epilayers is largely determined by growth temperature and surface adsorption efficiency. As the epitaxial temperature increases, the N doping concentration in the epilayer decreases. When the epitaxial temperature exceeds 1000 °C, the efficiency of N adsorption on β-Ga2O3 surfaces is influenced by both epitaxial parameters and substrate orientation. Modifying epitaxial parameters, especially by increasing chamber pressure, enhances the N concentration in β-Ga2O3 epilayers. Stronger N adsorption occurs on the (100)-plane compared to the (001)-plane epilayer; however, the (001)-plane epilayer allows better N concentration tuning through adjustments in parameters. First-principles calculations indicate that such observed differences in adsorption efficiency are attributable to variations in adsorption energies specific to each plane, coupled with competitive interactions between nitrogen (N) and oxygen (O) atoms during surface reactions. This study offers fundamental insights that advance the engineering of β-Ga2O3 homoepilayers for power electronics applications.
15 August 2025 in ACS Applied Materials & Interfaces
Mo4AlB4 and W4AlB4 are two 414-type MAB phase compounds that can be stabilized. Mo4AlB4 may be readily prepared as the corresponding MBene material. W4AlB4 may be an ideal candidate for EUV reflective coating.