The manual lifting of heavy loads by personnel is susceptible to the development of muscle fatigue, which, in severe cases, can result in the irreversible impairment of muscle function. This study proposes a novel method of signal fusion to analyse muscle fatigue during manual lifting. Furthermore, this study represents the inaugural application of the back-propagation neural network and bidirectional encoder representation from the transformer (BP + BERT) algorithm to the fusion of two sensor inputs for the analysis of muscle fatigue. Lifting action fatigue tests were carried out on 16 testers in this study, with both surface electromyography (sEMG) and mechanomyography (MMG) signals collected as part of the process. The mean power frequency (MPF) eigenvalues were extracted separately for the two signals, and the results of muscle fatigue labelling according to the trend of the MPF eigenpeak were merged to produce three datasets. Subsequently, the three datasets were employed to categorise muscle fatigue classes using the support vector machine and radial basis function (SVM + RBF), support vector machine and bidirectional encoder representation from transformer (SVM + BERT), back-propagation neural network (BP), and back-propagation neural network and bidirectional encoder representation from transformer (BP + BERT) algorithms, respectively. The results of the muscle fatigue classification model demonstrated that the sEMG and MMG fused dataset, imported into the BP + BERT algorithm, exhibited the highest average accuracy of 98.10% for the muscle fatigue classification model. This study indicates that the fusion of sEMG and MMG signals is an effective approach, and the performance of the BP + BERT muscle fatigue classification model is also enhanced.
In the present study, we used a transformer model and a fusion of biosignals to estimate rotational acceleration in elbow and shoulder joints. To achieve our study objectives, we proposed a mechanomyography (MMG) signal isolation technique based on a variational mode decomposition (VMD) algorithm. Our results show that the VMD algorithm delivered excellent performance in MMG signal extraction compared to the commonly used technique of empirical mode decomposition (EMD). In addition, we found that transformer models delivered estimates of joint acceleration that were more precise than those produced by mainstream time series forecasting models. The average R2 values of transformer are 0.967, 0.968, and 0.935, respectively. Finally, we found that using a fusion of signals resulted in more precise estimation performance compared to using MMG signals alone. The differences between the average R2 values are 0.041, 0.053, and 0.043, respectively. Taken together, the VMD isolation method, the transformer algorithm and the signal fusion technique described in this paper can be seen as supplying a robust framework for estimating rotational acceleration in upper-limb joints. Further study is warranted to examine the effectiveness of this framework in other musculoskeletal contexts.
In order to better design handling-assisted exoskeletons, it is necessary to analyze the biomechanics of human hand movements. In this study, Anybody Modeling System (AMS) simulation was used to analyze the movement state of muscles during human handling. Combined with surface electromyography (sEMG) experiments, specific analysis and verification were carried out to obtain the position of muscles that the human body needs to assist during handling. In this study, the simulation and experiment were carried out for the manual handling process. A treatment group and an experimental group were set up. This study found that the vastus medialis muscle, vastus lateralis muscle, latissimus dorsi muscle, trapezius muscle, deltoid muscle and triceps brachii muscle require more energy in the process of handling, and it is reasonable and effective to combine sEMG signals with the simulation of the musculoskeletal model to analyze the muscle condition of human movement.
To mitigate the difficulties associated with the extraction of Mechanomyography (MMG) signals from raw Accelerometer (ACC) data and the subsequent classification of human lower limb activities based on MMG signals, the Feature Mode Decomposition (FMD) algorithm has been utilized for the isolation of the MMG signal. Simultaneously, surface Electromyography (sEMG) signals were recorded to perform correlation analyses, thereby validating the effectiveness of the extracted Mechanomyography (MMG) signals. The results demonstrate that the envelope entropy derived from the FMD was the lowest among the observed values, and the composite signal obtained via FMD displayed the highest correlation with the sEMG signal. This indicates that FMD is capable of efficiently isolating the MMG signal while maintaining the maximal quantity of muscle contraction data. To address the challenge of classifying human lower limb activities, a comprehensive feature extraction procedure was implemented, resulting in the derivation of 448 unique features from multi-channel mechanomyography (MMG) signals. Subsequently, Kernel Principal Component Analysis (KPCA) was employed to diminish the feature set’s dimensionality. This was succeeded by the deployment of a Temporal Convolutional Network integrated with an Attention mechanism (TCN-Attention) to train the classification model. Additionally, an enhanced Northern Goshawk Optimization Algorithm was leveraged for optimization purposes. The findings indicate that FMD exhibited the minimum envelope entropy value of 8.13, concurrently attaining the maximum correlation coefficient of 0.87 between MMG and sEMG signals. Significantly, the SCNGO-TCN-Attention model demonstrated superior classification accuracy, attaining an exceptional accuracy rate of 98.44%.
To mitigate the difficulties associated with the extraction of Mechanomyography (MMG) signals from raw Acceleration (ACC) data and the subsequent classification of human lower limb activities based on MMG signals, the Feature Mode Decomposition (FMD) algorithm has been utilized for the isolation of the MMG signal. Simultaneously, surface Electromyography (sEMG) signals were recorded to perform correlation analyses, thereby validating the effectiveness of the extracted Mechanomyography (MMG) signals. The results demonstrate that the envelope entropy derived from the FMD was the lowest among the observed values, and the composite signal obtained via FMD displayed the highest correlation with the sEMG signal. This indicates that FMD is capable of efficiently isolating the MMG signal while maintaining the maximal quantity of muscle contraction data. To address the challenge of classifying human lower limb activities, a comprehensive feature extraction procedure was implemented, resulting in the derivation of 448 unique features from multi-channel mechanomyography (MMG) signals. Subsequently, Kernel Principal Component Analysis (KPCA) was employed to diminish the feature set's dimensionality. This was succeeded by the deployment of a Temporal Convolutional Network integrated with an Attention mechanism (TCN-Attention) to train the classification model. Additionally, the Sine-Cosine Northern Goshawk Optimization (SCNGO) algorithm was leveraged for optimization purposes. The findings indicate that FMD exhibited the minimum envelope entropy value of 8.13, concurrently attaining the maximum correlation coefficient of 0.87 between MMG and sEMG signals. Significantly, the SCNGO-TCN-Attention model demonstrated superior classification accuracy, attaining an exceptional accuracy rate of 98.44%.
(1) Background: Exoskeleton systems are being used increasingly in medical rehabilitation and industrial assistance. Accurate evaluation of their performance is crucial for optimising design and improving performance. In this paper, we propose a performance evaluation index system for exoskeletons and a quantitative evaluation method based on multi-source signal fusion. (2) Methods: The system utilises a variety of sensors for signal collection, encompassing sEMG and MMG, which are indicative of muscular fatigue, along with IMU signals, which demonstrate the movement of both the exoskeleton and the human body. This is then combined with the subjective evaluation scale to constitute the exoskeleton effectiveness assessment index system. (3) Results: This study evaluates two types of material handling exoskeletons. The findings indicate that the ultimate scores for the single-hip and hip-knee exoskeletons are 0.625 and 0.845, respectively. (4) Conclusions: A comparison of the indexes of the two exoskeletons and the subjective evaluations of the testers reveals that this method effectively quantifies the exoskeleton’s human metabolism, human–machine synergy and performance in working conditions, as well as the perceived effectiveness of assistance in different working conditions.