The rapid development of Internet of Things and artificial intelligence brings increasing attention on the harvesting of distributed energy by using triboelectric nanogenerator (TENG), especially the direct current TENG (DC-TENG). It is essential to select appropriate triboelectric materials for obtaining a high performance TENG. In this work, we provide a set of rules for selecting the triboelectric materials for DC-TENG based on several basic parameters, including surface charge density, friction coefficient, polarization, utilization rate of charges, and stability. On the basis of the selection rules, polyvinyl chloride, used widely in industry rather than in TENG, is selected as the triboelectric layer. Its effective charge density can reach up to ~8.80 mC m⁻² in a microstructure-designed DC-TENG, which is a new record for all kinds of TENGs. This work can offer a basic guideline for the triboelectric materials selection and promote the practical applications of DC-TENG.

As a new-era of energy harvesting technology, the enhancement of triboelectric charge density of triboelectric nanogenerator (TENG) is always crucial for its large-scale application on Internet of Things (IoTs) and artificial intelligence (AI). Here, a microstructure-designed direct-current TENG (MDC-TENG) with rationally patterned electrode structure is presented to enhance its effective surface charge density by increasing the efficiency of contact electrification. Thus, the MDC-TENG achieves a record high charge density of ~5.4 mC m⁻², which is over 2-fold the state-of-art of AC-TENGs and over 10-fold compared to previous DC-TENGs. The MDC-TENG realizes both the miniaturized device and high output performance. Meanwhile, its effective charge density can be further improved as the device size increases. Our work not only provides a miniaturization strategy of TENG for the application in IoTs and AI as energy supply or self-powered sensor, but also presents a paradigm shift for large-scale energy harvesting by TENGs.

Piezoelectric actuators have been extensively utilized as micro-displacement devices because of their advantages of large output displacement, high sensitivity, and immunity to electromagnetic interference. Here, we propose a straightforward approach to design -oriented defect dipoles by introducing A-site vacancies and oxygen vacancies in (K _0.48 Na _0.52 ) _0.99 NbO _2.995 ceramics. As a result, we achieve ultrahigh electrostrains of 0.7% at 20 kV cm ⁻¹ (with an effective piezoelectric strain coefficient d ₃₃ ^* = 3500 pm V ⁻¹ ), outperforming the performance of existing piezoelectric ceramics at the same driving field. The exceptional electrostrain is primarily attributed to the large stretching of defect dipoles when subjected to an applied electric field, a phenomenon that has been experimentally confirmed. Moreover, the strong interaction between these defect dipoles and spontaneous polarizations plays a critical role in minimizing hysteresis and ensuring excellent fatigue resistance. Our findings present a practical and effective strategy for developing high-performance piezoelectric materials tailored for advanced actuator applications.