Intelligent vehicles are constrained by road, resulting in a disparity between the assumed six degrees of freedom (DoF) motion within the Visual Simultaneous Localization and Mapping (SLAM) system and the approximate planar motion of vehicles in local areas, inevitably causing additional pose estimation errors. To address this problem, a stereo Visual SLAM system with road constraints based on graph optimization is proposed, called RC-SLAM. Addressing the challenge of representing roads parametrically, a novel method is proposed to approximate local roads as discrete planes and extract parameters of local road planes (LRPs) using homography. Unlike conventional methods, constraints between the vehicle and LRPs are established, effectively mitigating errors arising from assumed six DoF motion in the system. Furthermore, to avoid the impact of depth uncertainty in road features, epipolar constraints are employed to estimate rotation by minimizing the distance between road feature points and epipolar lines, robust rotation estimation is achieved despite depth uncertainties. Notably, a distinctive nonlinear optimization model based on graph optimization is presented, jointly optimizing the poses of vehicle trajectories, LPRs, and map points. The experiments on two datasets demonstrate that the proposed system achieved more accurate estimations of vehicle trajectories by introducing constraints between the vehicle and LRPs. The experiments on a real-world dataset further validate the effectiveness of the proposed system.

Most visual simultaneous localization and mapping (SLAM) systems are based on the assumption of a static environment in autonomous vehicles. However, when dynamic objects, particularly vehicles, occupy a large portion of the image, the localization accuracy of the system decreases significantly. To mitigate this challenge, this paper unveils DOT-SLAM, a novel stereo visual SLAM system that integrates dynamic object tracking through graph optimization. By integrating dynamic object pose estimation into the SLAM system, the system can effectively utilize both foreground and background points for ego vehicle localization and obtain a static feature points map. To rectify the inaccuracies in depth estimation from stereo disparity directly on the foreground points of dynamic objects due to their self-similarity characteristics, a coarse-to-fine depth estimation method based on camera–road plane geometry is presented. This method uses rough depth to guide fine stereo matching, thereby obtaining the 3 dimensions (3D)spatial positions of feature points on dynamic objects. Subsequently, by establishing constraints on the dynamic object’s pose using the road plane and non-holonomic constraints (NHCs) of the vehicle, reducing the initial pose uncertainty of dynamic objects leads to more accurate dynamic object initialization. Finally, by considering foreground points, background points, the local road plane, the ego vehicle pose, and dynamic object poses as optimization nodes, through the establishment and joint optimization of a nonlinear model based on graph optimization, accurate six degrees of freedom (DoFs) pose estimations are obtained for both the ego vehicle and dynamic objects. Experimental validation on the KITTI-360 dataset demonstrates that DOT-SLAM effectively utilizes features from the background and dynamic objects in the environment, resulting in more accurate vehicle trajectory estimation and a static environment map. Results obtained from a real-world dataset test reinforce the effectiveness.

3D object detection methods based on camera and LiDAR fusion are susceptible to environmental noise. Due to the mismatch of physical characteristics of the two sensors, the feature vectors encoded by the feature layer are in different feature spaces. This leads to the problem of feature information deviation, which has an impact on detection performance. To address this problem, a point-guided feature abstract method is presented to fuse the camera and LiDAR at first. The extracted image features and point cloud features are aggregated to keypoints for enhancing information redundancy. Second, the proposed multimodal feature attention (MFA) mechanism is used to achieve adaptive fusion of point cloud features and image features with information from multiple feature spaces. Finally, a projection-based farthest point sampling (P-FPS) is proposed to downsample the raw point cloud, which can project more keypoints onto the close object and improve the sampling rate of the point-guided image features. The 3D bounding boxes of the object is obtained by the region of interest (ROI) pooling layer and the fully connected layer. The proposed 3D object detection algorithm is evaluated on three different datasets, and the proposed algorithm achieved better detection performance and robustness when the image and point cloud data contain rain noise. The test results on a physical test platform further validate the effectiveness of the algorithm.

The environment perception algorithm in autonomous driving is trained in the source domain, leading to domain drift and reduced detection accuracy in the target domain due to shifts in background feature distribution. To address this issue, a domain adaptive object detection algorithm based on feature uncertainty is proposed, which can improve the detection performance of object detection algorithms in unlabeled data. Firstly, a local alignment module based on channel information is proposed, which can obtain the model’s uncertainty about different domain data based on the feature channels obtained through the feature extraction network, achieving adaptive dynamic local alignment. Secondly, an instance-level alignment module guided by local feature uncertainty is proposed, which can obtain the corresponding instance-level uncertainty through ROI mapping. To improve the domain invariance of bounding box regression, a multi-class, multi-regression instance-level uncertainty alignment module is proposed, which can achieve spatial decoupling of classification and regression tasks, further improving the model’s domain adaptive ability. Finally, the effectiveness of the proposed algorithm is validated on Cityscapes, KITTI, and real vehicle data.

Facing the significant challenge of 3D object detection in complex weather conditions and road environments, existing algorithms based on single-frame point cloud data struggle to achieve desirable results. These methods typically focus on spatial relationships within a single frame, overlooking the semantic correlations and spatiotemporal continuity between consecutive frames. This leads to discontinuities and abrupt changes in the detection outcomes. To address this issue, this paper proposes a multi-frame 3D object detection algorithm based on a deformable spatiotemporal Transformer. Specifically, a deformable cross-scale Transformer module is devised, incorporating a multi-scale offset mechanism that non-uniformly samples features at different scales, enhancing the spatial information aggregation capability of the output features. Simultaneously, to address the issue of feature misalignment during multi-frame feature fusion, a deformable cross-frame Transformer module is proposed. This module incorporates independently learnable offset parameters for different frame features, enabling the model to adaptively correlate dynamic features across multiple frames and improve the temporal information utilization of the model. A proposal-aware sampling algorithm is introduced to significantly increase the foreground point recall, further optimizing the efficiency of feature extraction. The obtained multi-scale and multi-frame voxel features are subjected to an adaptive fusion weight extraction module, referred to as the proposed mixed voxel set extraction module. This module allows the model to adaptively obtain mixed features containing both spatial and temporal information. The effectiveness of the proposed algorithm is validated on the KITTI, nuScenes, and self-collected urban datasets. The proposed algorithm achieves an average precision improvement of 2.1% over the latest multi-frame-based algorithms.