In this article, a novel DC–DC converter with high voltage gain capability is presented. The proposed converter is synthesised from (i) a basic two‐phase interleaved boost converter (IBC) which uses coupled inductors (CIs) instead of discrete inductors and (ii) diode‐capacitor multiplier (DCM) cells to achieve higher voltage conversion ratio. The outputs obtained from the interleaved and the DCM stages are judiciously cascaded with the outputs obtained from the secondary winding of the CIs to enhance the voltage gain. The input current is almost ripple free due to the adopted interleaving mechanism. As voltage gain is extended using CIs and DCMs, the voltage stress on the semiconductor devices is minimal and only a fraction (10.5%) of the output voltage. Experimental results obtained from the 18 V/380 V, 150 W prototype converter, operating at a maximum efficiency of 94% under full‐load condition, validate the proposed concept. Further, practical results obtained under closed‐loop condition confirm that the converter yields a constant output of 380 V DC which is suitable for microgrid application.

This study proposes a novel non‐isolated high‐gain high‐power DC–DC converter. The converter is developed from a basic high‐gain high‐power converter structure. The proposed converter comprises of a three‐phase interleaved boost converter, one coupled inductor and a voltage multiplier cell which act as gain extension stage. The main desirable features like voltage gain, stress on the switches and diodes, turns ratio, component utilisation factor and efficiency are summarised. The power circuit, operational details, simulation and experimental results of the 60 V/1.1 kV, 3 kW, 100 kHz proposed converter are presented.

In this study, a coupled inductor (CI)‐based high step‐up DC–DC converter is presented. The proposed topology is developed from a primitive quadratic boost converter (QBC) structure. A two‐phase interleaved QBC structure is obtained by employing multi‐winding CIs instead of discrete inductors as the energy storage magnetic element. The voltage gain is further extended by using (i) voltage lift capacitor, (ii) CIs and (iii) voltage multiplier cells. Consequently, the voltage stress on the main switches is reduced to 18.9% of the output voltage. Moreover, interleaving mechanism helps in achieving a smooth input current profile; the input current ripple is only 4.59% of the total input current magnitude. To validate the proposed concept, 18 V/380 V, 150 W prototype converter is constructed and experimented. Under experimentation, the converter delivers the required power to the load at 95% full‐load efficiency. Further, under closed‐loop condition, the output voltage from the converter is regulated to the required standard value of 380 V DC.

In this research article, major applications which use solar PV fed DC microgrid for either their routine operation or gain additional advantages over existing electrical power architecture are elaborated. The role of power converters in interfacing the input with the required output is highlighted. The advantages of solar PV fed DC microgrid are demonstrated by designing and testing a non-isolated high gain high power (HGHP) DC-DC converter to meet the DC distribution voltage level. The proposed converter is synthesized by using hybrid combination of three-phase interleaved boost converter (IBC) with voltage lift technique along with coupled inductors (CIs) and voltage multiplier cell (VMC). The proposed concept is practically demonstrated and the adopted design techniques are validated using simulation and experimentation. The proposed converter with 60V/1.1kV, 100kHz and 3kW rating operates at 92.3% full-load efficiency under practical conditions. Due to the gain extension techniques adopted, the switches used in the proposed converter are subjected to a voltage stress which is only 36% of the output voltage. Due to interleaving technique, the input current ripple and the current stress on the switches are only 15% and 33% of the input current respectively. Key performance parameters of this converter are thoroughly investigated and benchmarked with some state-of-the art converters to appreciate the salient features of the presented converter. The ability to yield higher voltage gain at safe duty ratio, high power handling capacity, low voltage and current stresses on the power switches are the main advantages of the proposed converter.