Mechanical stabilities and properties are critical in real applications of materials, as well as material and machine design. With the success of graphene, graphene-like materials arose tremendous interest in the past few years. Different from bulk materials, two-dimensional (2D) materials have prominent non-linear elastic behaviors. Here, we briefly review the mechanical stabilities and properties of graphene-like 2D III-nitrides, including boron nitride (BN), aluminum nitride (AlN), gallium nitride (GaN), indium nitride (InN), and thallium nitride (TlN). These nitrides are excellent wide band gap semiconductors very suitable for modern electronic and optoelectronic applications. As a result, they play a central role in solid-state light-emitting devices. Their Young’s modulus, Poisson’s ratio, ultimate tensile strength, and elastic limits under various strains are extensively studied, as well as their high-order elastic constants and non-linear behaviors. These studies provide a guide for their practical applications and designs.

A new type of SiC_f/TiC-Ti₃SiC₂ composite was prepared by the Spark Plasma Sintering (SPS) method in this work. The phase transformation and interface cracking of this composite under ion irradiation (single Xe, Xe + He, and Xe + He + H ions) and subsequent annealing were analyzed using transmission electron microscopy (TEM), mainly focusing on the interface regions. Xe ion irradiation resulted in the formation of high-density stacking faults in the TiC coatings and the complete amorphization of SiC fibers. The implanted H ions exacerbated interface coarsening. After annealing at 900 °C for 2 h, the interface in the Xe + He + H ion-irradiated samples was seriously damaged, resulting in the formation of large bubbles and cracks. This damage occurred because the H atoms reduced the surface free energy, thereby promoting the nucleation and growth of bubbles. Due to the absorption effect of the SiC_f/TiC interface on defects, the SiC fiber areas near the interface recovered back to the initial nano-polycrystalline structure after annealing.