This paper presents an experimental investigation of the dynamic thermo-mechanical and impact properties of helical auxetic yarns (HAYs). A series of thermoplastic polyurethane (TPU) core fibres fabricated using an extrusion process have been wrapped with either ultra-high-molecular-weight polyethylene (UHMWPE) wrap or stainless steel wire wrap to form helical auxetic yarns. Dynamic mechanical analysis (DMA) measurements indicated that the core/wrap diameter ratio and the initial wrap angle influenced significantly the dynamic thermo-mechanical behaviour of HAYs. The impact test results have shown that the fibre property, impact velocity and the initial wrap angle had great effect on the impact response of a HAY. Importantly, in this work it is shown that an optimal wrap angle can be found to give the best combination of stiffness, energy absorption and auxetic performance of HAYs
This paper introduces a novel extrusion process for manufacturing helical auxetic yarn (HAY). A range of semi-coextruded HAYs have been manufactured in a cost-effective, consistent and readily usable form. The semi-coextruded HAYs were compared to the conventional spun yarns in terms of tensile properties and auxetic behavior. The results show the presence of the auxetic effect in newly fabricated semi-coextruded HAYs. Similar to the traditional spun HAYs, the new HAYs are sensitive to parameters such as the initial wrap angle, the core/wrap diameter ratio and component moduli. Importantly, a few new manufacturing parameters have been identified for tailoring the auxetic behavior of the semi-coextruded HAYs. The semi-coextruded HAYs are auxetic when an instantaneous true Poisson’s ratio analysis method is applied. The semi-coextruded HAYs give a larger maximum negative Poisson’s ratio than the conventional HAYs due to the advantages of the pre-formed helical wrap structure.
7 October 2022 in Case Studies in Thermal Engineering