Persistent luminescence materials have applications in diverse fields such as smart signaling, anticounterfeiting, and in vivo imaging. However, the lack of a thorough understanding of the precise mechanisms that govern persistent luminescence makes it difficult to develop ways to optimize it. Here we present an accurate model to describe the various processes that determine persistent luminescence in ZnGa2O4:Cr3+, a workhorse material in the field. A set of rate equations has been solved, and a global fit to both charge/discharge and thermoluminescence measurements has been performed. Our results establish a direct link between trap depth distribution and afterglow kinetics and shed light on the main challenges associated with persistent luminescence in ZnGa2O4:Cr3+ nanoparticles, identifying low trapping probability and optical detrapping as the main factors limiting the performance of ZnGa2O4:Cr3+, with a large margin for improvement. Our results highlight the importance of accurate modeling for the design of future afterglow materials and devices.
Accurate quantification of efficiency enables rigorous comparison between different photoluminescent materials, providing an optimization path critical to the development of next‐generation light sources. Persistent luminescent materials exhibit delayed and long‐lasting luminescence due to the temporary storage of optical energy in engineered structural defects. Standard characterization methods do not provide a universal comparison of phosphor performance, hindering the evaluation of the efficiency of the various processes involved in afterglow. Here, a protocol is established to determine the quantum yield of persistent phosphors by considering the ratio of photons emitted in the afterglow and during charging to those absorbed. The method is first applied to transparent single crystals of the most common persistent phosphors, such as SrAl2O4:Eu2+,Dy3+ and Y3Al2Ga3O12:Ce3+,Cr3+. The versatility of the methodology is demonstrated by quantifying the quantum yield of a ZnGa2O4:Cr3+ thin film, a material widely used in in vivo imaging. The high efficiency of strontium aluminate is confirmed, and a strong dependence of the obtained values on the illumination conditions is revealed, highlighting a trade‐off between efficiency and brightness. The results contribute to the development of standardized protocols for analyzing afterglow mechanisms and assessing overall efficiency, facilitating rigorous comparison and optimization of persistent materials beyond trial‐and‐error approaches.
Persistent luminescence phosphor nanoparticles (PersLNPs) offer exciting opportunities for anticounterfeiting, data storage, imaging displays, or AC‐driven lighting applications owing to the possibility to process them as shapable thin coatings. However, despite unique delayed and long‐lasting luminescence, the relatively low storage capacity of persistent phosphor nanoparticles combined with the difficulty of harvesting photons from transparent thin layers drastically hinder the perceived afterglow. In order to enhance persistent luminescence (PersL) of thin coatings, herein a novel approach is proposed based on resonant optical nanostructures. In particular, it is demonstrated that the integration of TiO2 scattering spheres in films (with thickness comprised between 1 and 10 µm) made of ZnGa2O4:Cr3+ PersLNPs enables a significant increase in afterglow intensity due to the combination of effective charging and enhanced outcoupling. As a result, a ≈3.5‐fold enhancement of the PersL is observed in 2 µm‐thick films stuffed with scattering centers using low‐light illumination conditions. Furthermore, inclusion of scattering centers leads to an unprecedented acceleration of the PersL charging speed. These results constitute the first example of photonic engineering applied to enhance the properties of PersL materials coatings.
An in-depth study of the influence of the optical environment on the radiative decay rate in luminescent nanoparticles forming a thin film is presented. Theoretical predictions are experimentally validated and show a precise tuning of the emission.
Transparent coatings made of rare-earth doped nanocrystals, also known as nanophosphors, feature efficient photoluminescence and excellent thermal and optical stability. Herein, we demonstrate that the optical antennas prepared by colloidal lithography render thin nanophosphor films with a brighter emission. In particular, we fabricate gold nanostructures in the proximity of GdVO4:Eu3+ nanophosphors by metal evaporation using a mask made of a monolayer of polymer beads arranged in a triangular lattice. Optical modes supported by the antennas can be controlled by tuning the diameter of the polymer spheres in the colloidal mask, which determines the shape of the gold nanostructure, as confirmed by numerical simulations. Confocal microscopy reveals that metallic antennas induce brighter photoluminescence at specific spatial regions of the nanophosphor film at targeted frequencies as a result of the coupling between gold nanostructures and nanophosphors. Patterning of nanophosphor thin layers with arrays of metallic antennas offers an inexpensive nanophotonic solution to develop bright emitting coatings of interest for color conversion, labeling, or anti-counterfeiting.
Formamidinium lead iodide perovskite compositions have a low open circuit voltage deficit and thus a higher power conversion efficiency (PCE) potential. However, their low bandgap makes it difficult to achieve a semitransparent perovskite solar cell (ST‐PSC) with a high average visible transmittance (AVT) and thus, a high light utilization efficiency (LUE). Attaining a high AVT in such low bandgap perovskite‑based semitransparent solar cells requires the perovskite layer to be very thin (thickness < ≈100 nm) and the rear electrode to be made of a transparent conductive oxide. Moreover, both the front and rear electrodes should exhibit minimal reflectance losses. In this work, meeting these requirements, fully vacuum‐deposited, low bandgap (≈1.55 eV, ≈100 nm thick) semitransparent perovskite solar cells are fabricated that demonstrate a high LUE value of 4.2 (PCE: 9.26% and AVT: 45.3%). Additionally, a high color rendering index of 82.4 along with a high AVT of ≈48.5% is achieved in a ST‐PSC via modulation of the device reflectance by tuning both the perovskite layer thickness and the rear electrode stack. The ST‑PSCs retained > 90% of their efficiency for >1000 h when thermally stressed at 85 °C in N2 atmosphere.