Leakage of underwater crude oil pipes causes severe pollution to soil and water, and results in great economic loss. To predict the diffusion area of spilled oil before it reaches the water’s surface and to reduce the time required for emergency response, numerical simulations were conducted on underwater spilled oil diffusion of bare crude oil pipes using FLUENT software. The influences of water-surface wind speed, leakage hole diameter, water velocity, and initial leakage velocity on oil diffusion were analyzed. The results revealed the following: (1) with wind blowing on the surface of the water, the vertical displacement of spilled oil jet-flow was affected by the combined action of water flow and wind, making it difficult for a high-speed jet-flow to form. A horizontal oil flow mostly moved in the direction of the bottom water, and frontier oil droplets dispersed quickly; (2) during the diffusion of spilled oil in water, the maximum horizontal displacement mostly increased linearly, while the maximum vertical displacement initially increased quickly and then slowed; (3) the greater the initial velocity and leakage hole diameter, the higher the oil jet-flow and the wider the diffusion area; the higher the water flow rate and water-surface wind speed, the smaller the vertical displacement of spilled oil. The existence of water-surface wind had no obvious influence on the horizontal displacement of underwater spilled oil.
The dent on the pipeline is one of the important factors that influence the pipeline strength. Many international pipeline design standards generally use the dent depth to appraise whether the dented pipeline needs to be repaired. However, most of the dents that satisfied the standard still to be able to fail, so need to analyze more parameters that influence the dent strength and find out the relationship between them. Using the finite element method, the finite element models were established under different circumstances, and the strength of the dented pipeline that was applied internal pressure was calculated. Non-linear regression analysis was utilized to fit the results by Matlab, then the expressions of the relationships between the dented pipeline strength and the geometric parameters of dent, pipeline diameter, wall thickness and internal pressure were obtained under different circumstances. This can be used as part of the basic research of the pipeline design standards, and improve the accuracy of the dented pipeline assessment, as well as ensure that the security and reliability of the pipeline design and operation.
Hydrogen energy, as a clean and efficient secondary energy, has a broad application prospects under the global energy transition and carbon neutrality goals. Blending hydrogen into the natural gas pipeline is the most technologically viable and economically feasible approach for hydrogen transportation while resulting in more severe leakage consequences. The existing studies mainly focus on buried pipelines, while ignoring above-ground pipelines, which have a wider impact range due to the lack of soil resistance. In this study, the numerical simulation method is used to investigate the effect of the hydrogen blending ratio on leakage diffusion and explosion range of above-ground natural gas pipelines. The results show that the hydrogen blending ratio (HBR) has a small effect on the leakage diffusion range, but a significant effect on the explosion range and the leakage velocity. When the hydrogen blending ratio is less than 10%, the leakage diffusion range, the explosion range, and the leakage velocity are close to the natural gas condition. This study provide theoretical guidance for the selection of the hydrogen blending ratio for natural gas pipelines.