Nano-photonic technologies of GaAs-based two-dimensional photonic crystal (2DPC) slab waveguides (WGs) and InAs-based quantum dots (QDs) are reviewed for a symmetrical Mach–Zehnder (SMZ) type, ultra-small and ultra-fast all-optical switch (PC-SMZ) and logic device. As the first phase, ultra-fast (~ps) and ultra-low energy (~100 fJ) switching has been demonstrated using a chip 600 μm×300 μm in size. The second phase is to create a PC-SMZ-based ultra-fast photonic logic switch with a latch function for a future ultra-fast photonic digital processor. One of the priority subjects is to establish a new design method, i.e., topology optimization (TO) method of 2DPC-WGs with wide/flat bandwidth, high transmittance and low reflectivity. Another one is to develop selective-area-grown, high-density and highly uniform InAs QDs with large optical nonlinearity (ONL) by using a metal-mask (MM) molecular beam epitaxy (MBE) growth method. Recent results regarding these two subjects encourage us to reach the final goal.
Using a hydrogen-terminated Si {111} surface as a substrate, we have grown Si nanowhiskers along the 〈112〉 direction by the vapor–liquid–solid mechanism. The minimum silicon core diameter was 3 nm and the maximum length was about 2 μm. The minimum silicon core diameter is close to the critical value for visible light emission due to the quantum confinement effect. In contrast to an oxidized Si surface, the hydrogen-terminated surface facilitates the formation of small molten Au–Si catalysts at a lower temperature (500 °C) which is slightly above the eutectic temperature. The formation of catalysts and the subsequent growth at the low temperature yield thin Si nanowhiskers on a Si substrate.
Electric and magnetic properties were investigated on -type doped with nitrogen (N) as an acceptor. Thin films of were grown by molecular-beam epitaxy with the supply of gas excited by rf plasma. With the increase of Cr composition at an almost fixed N concentration of the order of , the temperature dependence of resistivity changed from metallic behavior to an insulating one, accompanied with a significant decrease of the hole concentration. The magnetization measurements revealed that ferromagnetic behaviors observed in undoped were suppressed due to the nitrogen doping; with N concentrations of the order of , hysteresis loops in the magnetization curve disappeared, the magnitude of magnetization decreased, and the ferromagnetic transition were not observed down to 2 K according to the Arrott plot analysis. These experimental findings are discussed on the basis of the ferromagnetic double exchange interaction which is considered to work on the Cr impurity level formed in the band gap of ZnTe.
Topology optimization has been used to design intersections in two-dimensional photonic crystal slab waveguides. We have experimentally confirmed that the optimized intersection displays high-transmittance with low-crosstalk for the straightforward beam-propagation line.
The effect of additional doping of charge impurities was investigated in a ferromagnetic semiconductor . It was found that the doping of iodine, which is expected to act as an -type dopant in ZnTe, brought about a drastic enhancement of the ferromagnetism in , while the grown films remained electrically insulating. In particular, at a fixed Cr composition of , the ferromagnetic transition temperature increased up to 300 K at maximum due to the iodine doping from of the undoped counterpart, while the ferromagnetism disappeared due to the doping of nitrogen as a -type dopant. The observed systematic correlation of ferromagnetism with the doping of charge impurities of both the and type, suggesting a key role of the position of Fermi level within the impurity state, is discussed on the basis of the double-exchange interaction as a mechanism of ferromagnetism in this material.
High transmission of slow-light in a photonic crystal (PC) waveguide (WG) using a hetero group-velocity (Ht-Vg) PC-WG was proposed and experimentally investigated. The Ht-Vg WG, which comprises a low-group-velocity (L-Vg) PC-WG section between two identical high-group-velocity (H-Vg) PC-WGs, is designed to decrease the impedance mismatch of the L-Vg PC-WG. The increase in transmittance of a propagating pulse was confirmed in the Ht-Vg PC-WG even in the vicinity of the band-gap, whereas the homogeneous PC-WG showed a gradual decrease in transmittance with the pulse wavelength approaching the band-gap. The group index (ng) of the L-Vg region in the Ht-Vg PC-WG was measured by the cross-correlation method and attained a value above 20. On the other hand, the transmittance of the Ht-Vg structure recovered approximately 16dB compared to the homogeneous L-Vg WG having same ng, 17. This recovery is mainly dominated by the coupling improvement due to the Ht-Vg structure, around 12dB. These results indicate the effectiveness of the Ht-Vg structure to use slow light in a PC-WG, which leads to various applications in PC-based optical devices.