In regions of China experiencing severe cold, the duration of the winter heating season significantly contributes to elevated heating energy consumption in rural dwellings. This study focuses on typical brick-and-concrete rural homes in the Wusu area. Utilizing the Rhino–Grasshopper parametric modeling platform, it aims to minimize heating-related carbon emissions and the overall costs associated with retrofitting. The approach involves improving the insulation properties of the building envelope to reduce energy requirements. Additionally, the study incorporates solar photovoltaic systems atop rural homes, building upon low-carbon, passive, energy-efficient design principles. By examining the influence of various factors on rural housing energy consumption, the research employs the entropy weight method to identify the most effective design solutions. The goal is to explore strategies for the energy-efficient retrofitting of rural dwellings in areas faced with harsh winter conditions, aligning with the objectives and preferences of Applied Sciences. The simulation results reveal the following: (1). In comparison with the baseline scenario, 42.2% of the optimized solutions within the Pareto frontier satisfy the current standards for 75% energy savings in energy-efficient residential design. (2). The lowest recorded thermal consumption index for the buildings can reach 12.427 W/m2, at which point the rate of energy savings is elevated to 79.5%. (3). Within the solutions identified by the Pareto frontier, 80% exhibit initial investments that are lower than the cost savings over the lifecycle due to reduced energy consumption ( < 0), demonstrating the economic feasibility of the proposed retrofitting strategies.
Ribbon waterfront parks in hot summer and cold winter regions play a crucial role in microclimate regulation and thermal comfort enhancement due to the combined effects of water bodies and vegetation. This study focuses on ribbon waterfront parks in Hefei. This study investigates the influence of park environmental factors (e.g., plant community characteristics, spatial configuration of water bodies, and plaza layouts) on the summer thermal environment through field measurements and ENVI-met numerical simulations. Based on field studies and a literature review, five environmental factors were selected as test variables: water body direction (S), tree planting density and arrangement (A), square distribution form (B), square location (C), and pavement material (D). Using orthogonal testing, 64 different environmental scenarios under four distinct water body orientations were designed and simulated using ENVI-met (Version 5.6.1), followed by a quantitative analysis of the simulation results. The findings reveal that the interaction between water body orientation and prevailing wind direction significantly influences the cooling efficiency in both the upwind and downwind regions. In addition, through orthogonal testing, Range Analysis (RA), and analysis of variance (ANOVA), the order of magnitude of the effect of each experimental factor on the Universal Thermal Climate Index (UTCI) can be derived: density and form of tree planting (A) > pavement material (D) > location of the square in the park (C) > forms of distribution of squares in the park (B). Finally, this study suggests various environmental factor-setting schemes for ribbon waterfront parks that are tailored to distinct microclimatic requirements. It also provides design recommendations to improve thermal comfort in parks based on the orientation of different water bodies. Furthermore, it offers specific references and foundations for planning, designing, optimising, and renovating waterfront parks of similar scales.
T8 LED tubes with adjustable brightness and color temperature are installed in the workshop for workers to adjust their lighting independently. The illuminance of the workers’ working surface is dynamically monitored for one year, and the collected illuminance data are quantitatively analyzed to explore the suitable illuminance threshold and color temperature preference for workers in real scenes. The illuminance value is divided according to time period and season, which provides reference for the development of intelligent buildings. For the three workflows in the post-finishing workshop, the lighting environment was optimized based on the uniformity of illumination, and the optimal height of the lighting arrangement was determined. The optimal luminaire placement height for the bar tacking machine was found to be 1.28 m, for the auxiliary workbench it was 1.02 m, and for the ironing table it was 1.2 m.
Lecture halls are characterized by large spatial dimensions, deep floor plans, and high occupant densities. Lectures are typically conducted using multimedia and blackboard-based teaching, placing higher demands on the indoor light and thermal environment compared to standard classrooms. This study aims to simulate the interrelationships between multiple building envelope parameters and building performance, in order to improve visual and thermal comfort while reducing energy consumption in cold-region lecture halls. Based on seven key envelope parameters—including openable window area ratio, west-facing window-to-wall ratio, exterior insulation thickness, shading element spacing, angle and width, and window glass type—a multi-objective optimization framework was established. The optimization process targeted three key performance indicators—useful daylight illuminance (UDI), energy use intensity (EUI), and thermal comfort percentage (TCP)—in the context of a stepped classroom. The results show that increasing the thickness of exterior insulation and reducing the width of shading components contribute positively to photothermal comfort without compromising thermal and visual performance. Compared with the baseline design, optimized schemes that incorporate appropriate west-facing window-to-wall ratios, openable window areas, insulation thicknesses, and external shading designs can reduce annual energy consumption by up to 10.82%, and increase UDI and TCP by 12.79% and 36.41%, respectively. These improvements are also found to be economically viable.