Temperature changes have significant effects on rock properties. The changes in properties vary for different rocks with different temperature ranges. Granite is an igneous type of rock that is common in India and is frequently used for construction and domestic purposes. Granite is mainly composed of quartz and feldspar and shows a considerable response to temperature changes and is the subject of this paper. A comprehensive review of the published literature has been conducted in this paper. Comparison of the findings of such works in terms of the impact of temperature changes on basic mechanical, physical, and thermal properties of granite, viz. thermal damage, density, p-wave velocity, compressive strength, peak stress, peak strain, and Young’s modulus from room temperature to 1000 °C has been conducted. The published data of different researchers have been utilized for such comparison. The study revealed that there is a significant departure in response to the rock recorded by various researchers, which may be due to the constitution of the rocks analyzed or experimental procedures. This points to the standardization of such tests. The main reason for changes in the properties of granite has also been discussed. Consequently, the findings of this state-of-the-art demonstrate that the heating effects of granite on its physical and mechanical properties become increasingly pronounced with increasing pick temperatures. The purpose of this article is to provide readers with an extremely well-structured, seamless environment that facilitates a critical assessment of granite in order to determine its thermal profile.
This research investigates the engineering properties of sandstone through tests performed prior to and following heat treatment. This study concentrated on evaluating the physical and mechanical properties, such as density, compressive strength, and wave velocities, in conjunction with the mineralogical, Cerchar hardness, and basic geochemical characteristics of the rock. Heat treatment was conducted at different temperatures (35 °C, 200 °C, 400 °C, 600 °C, and 800 °C), followed by analyses utilizing X-ray fluorescence (XRF), thin section analysis, and scanning electron microscopy (SEM) techniques. The results were analyzed to assess the influence of heat treatment on rock properties, utilizing Design Expert software for data evaluation. Numerical analysis with FLAC3D was conducted to validate the observed values at various temperature levels, further investigating the impact of the treatment on the engineering properties of sandstone. A significant finding was the reduction in strength, particularly correlated with a decrease in primary wave velocity, which is associated with an uneven distribution of strength within the rock. Increased temperature results in stress concentrations that facilitate crack formation, while variations in grain size significantly influence crack propagation. This study highlights the substantial influence of temperature on the compressive strength and general material properties of sandstone.