Offshore wind turbines in seismic active areas suffer from earthquake impacts. In this study, seismic fragility analysis of a monopile offshore wind turbine considering different operational conditions was performed. A finite element model for a 5 MW monopile offshore wind turbine was developed using the OpenSees platform. The interaction between the monopile and the seabed soil was modeled as a beam-on-nonlinear-winkler-foundation (BNWF). A nonlinear time history truncated incremental dynamic analysis (TIDA) was conducted to obtain seismic responses and engineering demand parameters. Potential damage states (DSs) were defined as excessive displacement at the nacelle, rotation at the tower top, and the allowable and yield stresses at the transition piece. Fragility curves were plotted to assess the probability of exceeding different damage states. It was found that seismic responses of the wind turbine are considerably influenced by environmental wind and wave loads. Subject to earthquake motions, wind turbines in normal operation at the rated wind speed experience higher levels of probability of exceeding damage states than those in other operational conditions, i.e., in idling or operating at higher or lower wind speed conditions.

An analytical model is developed based on linear potential flow theory and matching eigenfunction expansion technique to investigate the hydrodynamics of a two-dimensional floating structure. This structure is an integration system consisting of a breakwater and an oscillating buoy wave energy converter (WEC). It is constrained to heave motion, and linear power take-off (PTO) damping is used to calculate the absorbed power. The proposed model is verified against the published results. The proposed integrated structure is compared with the fixed structure and free heave-motion structure, respectively. The hydrodynamic properties of the integrated structure with the optimal PTO damping i.e., the transmission coefficient, reflection coefficient, capture width ratio (CWR), and heave response amplitude operator (RAO), are investigated. The effect of the PTO damping on the performance of the integrated system is also evaluated. Results indicate that with the proper adjustment of the PTO damping, the proposed integrated system can produce power efficiently. Meanwhile, the function of coastal protection can be compared with that of the fixed structure.

The cost of wave energy converters (WECs) can be reduced significantly by integrating WECs into other marine facilities, especially in sea areas with a mild wave climate. To reduce the cost and increase the efficiency, a hybrid WEC system, comprising a linear array (medium farm) of oscillating buoy-type WECs attached to the weather side of a fixed-type floating pontoon as the base structure is proposed. The performance of the WEC array is investigated numerically using a boundary element method (BEM) based on the linear potential flow theory. The linear power take-off (PTO) damping model is used to calculate the output power of the WEC array. The performance of the WEC array and each individual WEC device is balanced by using the mean interaction factor and the individual interaction factor. To quantify the effect of the pontoon, the hydrodynamic results of the WEC arrays with and without a pontoon are compared with each other. Detailed investigations on the influence of the structural and PTO parameters are performed in a wide wave frequency range. Results show that the energy conversion efficiency of a WEC array with a properly designed pontoon is much higher than that without a pontoon. This integration scheme can achieve the efficiency improvement and construction-cost reduction of the wave energy converters.