Energy needs have increased with global advancements and industrial revolutions. Electrical energy utilization shares a huge amount of energy with residential and industrial loads. Traditional energy resources are expensive and polluting, producing greenhouse gasses, which is a major environmental concern. Solar energy utilization is a cost-effective, sustainable, and green solution to meet the ongoing energy demand. Concentrator photovoltaic (CPV) systems are developed for energy conversion by providing high efficiency using multi-junction solar cells. This paper provides an overview of the recent optical developments in CPV systems and emerging technologies that are likely to shape the future of CPV systems. The objective of this article is to provide an overview of the issues that need to be resolved to improve the geometrical concentration, acceptance angle, uniformity, and optical efficiency of CPV systems. A comprehensive comparison is also presented on different types of solar concentrators. In addition, future research directions are presented to facilitate the continued growth and success of CPV systems. Furthermore, this review article gives an up-to-date and widespread overview of CPV technology, assesses its potential for various applications, and distinguishes the challenges and opportunities for future research and development.

As the global focus on sustainability intensifies, architects and engineers are increasingly seeking innovative passive strategies to improve building energy efficiency. Among these strategies, the strategic integration of louvers has garnered significant attention due to their potential to optimize building envelope performance and reduce energy consumption. Louvers effectively manage solar heat gain, mitigating the impact of extreme temperatures on indoor spaces. Consequently, louvers reduce the reliance on active HVAC systems, leading to notable energy savings and a decreased carbon footprint. This paper presents a comprehensive review of the role of louvers in enhancing building energy efficiency, highlighting their designs, efficiency, and improvement suggestions. Moreover, this review article addresses potential challenges related to louver design, such as balancing the trade-off between solar heat gain and daylighting and how to optimize louver configurations for specific building types. Approaches to overcome these challenges, including advanced modeling techniques and parametric design, are also explored to assist architects and designers in achieving the most energy-efficient outcomes.

Solar energy is a long-established technology, which has zero CO₂ emissions, and provides low-cost energy for a given area of land. The concentrator photovoltaic (CPV) has been given preference over the photovoltaic due to its high efficiency. In a CPV system, most of the solar cell area has been replaced with an optical concentrator. Various parabolic trough based CPV systems have been presented where a concentration of <300 is achieved. In the current research, a design is presented to achieve a high concentration of 622×. The design consists of two stages of concentration including parabolic trough as a main concentrator and nonimaging reflective grooves as a secondary concentrator. The trough reflects the incident light towards the secondary reflector where the light is redirected over the solar cell. Design of the two-stage concentrator, ray-tracing simulation, and results are presented. The system achieved an optical efficiency of 79%. The system would also be highly acceptable in solar thermal applications owing to its high concentration.

In order to maintain the efficiency of any power system, there is a strict need for its continuous monitoring. The supply and the demand gap is corrected as well as the outages rectified within the specific timeframe. In order to accomplish this task, SCADA (Supervisory Control and Data Acquisition) systems are implemented. This study is conducted for capital territory of Pakistan. The capital city Islamabad is divided into different regions and their output results are estimated. The covers the impact of the SCADA systems and their implementation for Islamabad. Simulation results are conducted for the AC voltage and the AC current signs in the power systems and corresponding conclusions are devised.

Fast Fourier Transform (FFT) is computationally an efficient algorithm that transforms a function in time domain to function in frequency domain. All 3G and 4G wireless technologies use OFDM and FFT is an integral block of transceiver loop. In this paper three FFT architectures are designed that fall within the Cooley-Tukey class of algorithms. These FFT designs are targeted for OFDM applications especially in future generations of Software Defined Radio (SDR) systems. The FFT is performed on 64-point complex valued input samples with 16-bit precision. Each core is optimized for a combination of area, power, and speed. The design is targeted for a partially reconfigurable FPGA platform such as Xilinx Virtex-4 or above. The FFT cores have been simulated in Model Sim and synthesized using Xilinx ISE software. The cores can be readily downloaded on to target FPGA board to check for run time configurability. The performance evaluation of these cores show that they run at clock frequency of about 80MHz.