The biomechanical properties of the cornea should be taken into account in the refractive procedure in order to perform refractive surgery more accurately. The effects of the ablation depth and repair time on the elastic modulus of the rabbit cornea after laser in situ keratomileusis (LASIK) are still unclear. In this study, LASIK was performed on New Zealand rabbits with different ablation depth (only typical LASIK flaps were created; residual stroma bed was 50 or 30% of the whole cornea thickness respectively). The animals without any treatment were served as normal controls. The corneal thickness was measured by ultrasonic pachymetry before animals were humanly killed after 7 or 28 days post-operatively. The corneal elastic modulus was measured by uniaxial tensile testing. A mathematical procedure considering the actual geometrics of the cornea was created to analyze the corneal elastic modulus. There were no obvious differences among all groups in the elastic modulus on after 7 days post-operatively. However, after 28th days post-operatively, there was a significant increase in the elastic modulus with 50 and 30% residual stroma bed; only the elastic modulus of the cornea with 30% residual stroma bed was significantly higher than that of 7 days. Changes in elastic modulus after LASIK suggest that this biomechanical effect may correlate with the ablation depth and repair time.

We synthesize Sb/Sb₂O₃ nanoparticles by the oxidation of Sb nanoparticles at 100, 200, and 300 °C. The half sodium-ion batteries with Sb/Sb₂O₃-200 exhibit the optimal performance with a charge capacity of 540 mAh g⁻¹ after 100 cycles at 0.1 A g⁻¹, maintaining up to six times more capacity than pure Sb, and superior rate performance with 95.7% retention after cycling at varied current densities. One reason for this is that Sb/Sb₂O₃-200 is at exactly the optimum ratio of Sb₂O₃:Sb and the particle size of Sb/Sb₂O₃ to ensure both high capacity for Na⁺ and small stress during sodiation/desodiation, which is confirmed by the diffusion–stress coupled results. It indicates that increasing the ratio of Sb₂O₃:Sb causes a decrease of Mises equivalent stress, radial stress, and tangential stress in the range of 1:1–3.5:1, and an increase in the range of 3.5:1–4:1. These stresses decrease with a particle radius in the range of 30–50 nm and increase with a particle radius in the range of 50–70 nm. Additionally, another reason is related to the formation of cycling-induced coral-like Sb, which can promote Na⁺ diffusion, relieve cycling-induced volume changes, and provide exceptional Na⁺ storage.