Efficient treatment of nutrient-rich wastewater is of paramount importance for protecting the ecosystem. In this work, an efficient, abundant, and eco-friendly adsorbent was derived from biochar and employed for phosphorus (P) adsorption. The key factors influencing the P removal efficiency of the activated biochar, including P concentration, pH, dosage, temperature, adsorption time, and influence of co-existing ion type, were investigated. Maximum P adsorption percentage (100%) was obtained with 10 mg/L and zinc chloride activated biochar (BC–Zn) compared to the other activated biochars. Results show that by increasing the P concentration from 5 to 200 mg/L, the phosphorus adsorption capacity increases from 0.13 to 10.4 mg/g biochar. Isotherms and kinetic studies further show that the P adsorption follows the Langmuir and quasi-second-order kinetic models. The mechanistic investigation demonstrated that P adsorption occurred by precipitation reaction. Furthermore, P desorption has been studied at different time intervals to understand the P release rate after adsorption.

Municipal solid waste (MSW) is rising globally, and improper management harms the environment and public health. As a result, there is heightened interest in finding effective solutions, and identifying research trends helps determine the best management and valorization pathways. However, the existing reviews often focus narrowly on specific technologies or regional case studies, lacking a comprehensive analysis of global research trends. This study addresses this significant gap by conducting a large-scale trend analysis based on 15,646 relevant articles screened from 25,068 Scopus-indexed publications from 1904 to 2023 using title, abstract, and keyword analysis. Literature-based comparative assessments were conducted to critically evaluate the pathways through TEE (techno-economic and environmental), SWOT (strengths, weaknesses, opportunities, and threats), and PESTEL (political, economic, social, technological, environmental, and legal) frameworks. Since 1990, article publication has increased by about 10% annually, consistently concentrating on thermochemical conversion and, more recently, on sustainability and circular economy perspectives. Seven distinct pathways for MSW management were identified, with recycling and material recovery, followed by thermochemical conversion for high-calorific waste and biochemical conversion for high-organic waste, showing the most promise. The findings aim to help researchers understand MSW research trends and assist planners in identifying effective management and valorization strategies.

The conversion of biomass into bio-oil through the pyrolysis process offers numerous benefits, such as bio-fuel and bio-resin synthesis. However, for bio-oil usage for any application, understanding its composition is vital. Therefore, this study investigated the effects of different commonly available woody biomass (Douglas fir, eucalyptus, and poplar) on bio-oil composition. The bio-oil was produced through fast pyrolysis at 500 °C in a fluidized bed reactor and collected using an electrostatic precipitator. The chemical composition was analyzed using gas chromatography–mass spectroscopy, and the hydroxyl groups were quantified using phosphorous-31 nuclear magnetic resonance. The poplar bio-oil had the most significant proportion (67 area%) of lignin-derived compounds and the highest OH concentration (6 mmol g⁻¹). However, the proportion of carbohydrate-derived compounds was the largest (44 area %) in bio-oil produced from Douglas fir. Based on the OH concentration, poplar would be the most suitable feedstock for resin synthesis among the three feedstocks tested.