Bo Yan

Dr. Bo Yan

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
BYBo Yan
Bo Yan
XWXiuhe Wang
Xiuhe Wang
YYYubo Yang
Yubo Yang
This paper presents a composite solid rotor designed to improve starting performance of the line-start permanent-magnet synchronous motor (LSPMSM). The rotor is mainly constituted by the solid steel which can inherently generate high starting torque. Moreover, the axial slots milled on the rotor surface deepen the flux penetration into core and a brass made cage attached to the rotor enlarges the eddy current density. With above promotions, the induction torque increases, and hence drives the motor to startup and synchronize under heavy load conditions. The enhanced starting capability by applying the proposed rotor for an LSPMSM is validated by the 2-D time-stepping finite-element method (FEM). To guarantee a well match with the 3-D construction where end effects occur, an equivalent circuit is built in the 2-D method to represent the uneven ring fractions. Simultaneously, considering the non-axial currents in core ends, conductivity of the solid-rotor segments in 2-D field is corrected by a multistep optimum-seeking technique. Calculation precision of the 2-D FEM covering end effects is certificated by the corresponding 3-D FEM with good results agreement.

15 July 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
BYBo Yan
Bo Yan
YYYubo Yang
Yubo Yang
XWXiuhe Wang
Xiuhe Wang
This article presents a successful design of a three-phase large capacity line-start permanent magnet synchro nous motor (LSPMSM) developed for industrial applications. A hybrid rotor containing both slotted solid steels and cage bars is included in the designed LSPMSM to enhance the motor starting and synchronizing abilities. A salient rotor periphery making air-gap length, which maximizes at the quadrature axis and minimizes at the direct axis, is employed to reduce the harmonics of air-gap flux density and motor losses. The implementation of a genetic algorithm coupled with a neural network optimizes the rotor-periphery saliency ratio and other crucial dimensions for further performance improvement. Finite-element analyses highlight the advantages of the designed LSPMSM by comparing its performance indexes with those of a conventional cage-rotor LSPMSM. The effectiveness of the designed motor is validated by a series of prototype tests.

3 May 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
BYBo Yan
Bo Yan
XLXianglin Li
Xianglin Li
XWXiuhe Wang
Xiuhe Wang
YYYubo Yang
Yubo Yang
DCDaolian Chen
Daolian Chen
A hybrid computing method for predicting the magnetic field of line-start permanent magnet synchronous motor is presented in this article. The vector magnetic potential (VMP) is selected to be the primary objective of the calculation. For the convenience of expressing the VMP in the polar coordinate system, the topology of each motor component is replaced by the assembly of radial sectors. Along with the topology approximation, the VMPs of the stator and air gap are determined analytically, whereas the finite difference method is used to calculate the VMP of the rotor with the eddy current. Combining the numerical technique with the analytical method not only enables solution efficiency higher than using the former one merely but also keeps away from the inefficacy of using the latter one solely to predict magnetic fields with complex geometry. The presented approach is validated by the finite-element analysis and prototyping tests.

10 October 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
XLXianglin Li
Xianglin Li
SLShengwei Liu
Shengwei Liu
QWQiusheng Wang
Qiusheng Wang
BYBo Yan
Bo Yan
ZHZhongnian Huang
Zhongnian Huang
KWKai Wang
Kai Wang
This paper proposes a stator-excitation axial-flux magnetic gear (SEAMG) based on innovative improvement from rotor excitation to stator excitation for the magnetic gear. The key design of the proposed SEAMG is to place the permanent magnets (PMs) on the stator, aiming at only retaining iron on rotors to enhance its mechanical robustness, and the PMs located on the stator can be avoided falling off to further improve operation reliability. An axial-flux pattern is adopted so as to make that the stator can be easily fixed to the housing and the high- and low-speed rotor shafts can be conveniently led out from axial side. Hence, compared with the existing coaxial rotor-excitation MGs, the proposed SEAMG has improved mechanical reliability and low processing difficulty. Its operation principle is explained and the general optimization design considerations are illustrated to achieve expected torque transmission performance. A prototype is built and performance evaluation using the 3-D finite element analysis (FEA) and the experiments is conducted to verify its validity.

26 October 2023 in IET Electric Power Applications
Verified
Journal Article
Open access
BYBo Yan
Bo Yan
XLXianglin Li
Xianglin Li
XWXiuhe Wang
Xiuhe Wang
YYYubo Yang
Yubo Yang
As a type of magnetic device being able to realize contact‐free power transmission together with sufficient volumetric torque density, the field‐modulated magnetic gear (FMMG) has become a promising alternative to the mechanical gear having rigid construction yet suffering lots of issues generated by the continuous teeth friction. The conventional magnetic gears (MGs) that behave as simple copies of their mechanical counterparts and can be roughly defined as origination of the FMMG are briefly introduced at first. Subsequently, the topology and material advancements proposed to improve operational performance of the FMMG are comprehensively summarised so as to clarify its current development status. Finally, potential applications of the FMMG due to its inherent advantages are compared against the existent challenges. The review aims to provide referable guidelines for researchers working at the field of high‐performance MGs.

7 March 2023 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
JLJinpeng Liu
Jinpeng Liu
XLXianglin Li
Xianglin Li
BYBo Yan
Bo Yan
Wei HuaWei Hua
Wei Hua
XWXiuhe Wang
Xiuhe Wang
The hybrid subdomain method (HSDM) combining conventional SDM with equivalent magnetic network has been proved to be a qualified approach to field prediction. However, this method still suffers two issues: first, the saturation effect of stator core is considered but that of rotor core is ignored, thus causing no-accuracy calculation; second, the mathematical complexity is inevitable due to adoption of virtual line-current density as extra interface conditions. This work is to develop an improved HSDM (IHSDM) for accurately and efficiently predicting the electromagnetic performance of a field-modulated permanent-magnet motor. The key of the proposed IHSDM is to fully consider magnetic saturation inside both stator and rotor cores. More importantly, the replacement of virtual-line current density by virtual-surface magnetization and current density makes interface conditions as simple as the SDM. The quantitative comparisons with conventional HSDM and FEA are conducted and the prototyping tests are also performed. It shows that the proposed IHSDM has lower time consumption and occupied memory, and electromagnetic quantities have about two times more accuracy than conventional HSDM. Additionally, a dynamic calculation is achieved by the IHSDM and verified by FEA.