A significant part of the world, especially in most of the Asian countries, has heterogeneous traffic characterized by diverse vehicles, changing composition, lack of lane discipline, etc., resulting in a very complex behavior. Microsimulation is, therefore, highly suited to model such traffic. However, these models need to be calibrated before their application. Although several studies have been reported in the literature on the methodologies for calibration, all of them have focused on homogeneous traffic conditions having good lane discipline. In highly heterogeneous traffic, several other factors such as traffic composition and static and dynamic characteristics of vehicles have to be considered in the calibration process. Moreover, side-by-side stacking of vehicles across the road width occurring in the absence of lane discipline should also be modeled. Hence, a methodology for representing nonlane-based driving behavior and calibrating a microsimulation model for highly heterogeneous traffic at signalized intersection is proposed. Calibration parameters were identified using sensitivity analysis, and the optimum values for these parameters were obtained by minimizing the error between the simulated and field delay using genetic algorithm. The proposed methodology is illustrated using Verkehr in Staedten simulation, a widely used psychophysical car-following model based microsimulation software. Signalized intersections having diverse traffic and geometric characteristics from two cities of India are taken as a case study.
Signalisation is a traffic control strategy to ease the competition by providing right-of-way in a cyclic manner to conflicting traffic at intersections. Saturation flow is a major component in the design of signals, and is influenced by a variety of factors like vehicle composition, intersection geometry and driver's behaviour. The highway capacity manual (HCM) has recommended a saturation flow model primarily for homogeneous conditions, with limited ability to address heterogeneity. But the traffic in many parts of the world is highly heterogeneous and hence, defining a unified saturation flow concept is a challenging task. The variability in vehicle types necessitates the use of passenger car units (PCUs). This article proposes a methodology to develop a saturation flow model based on dynamic PCUs by a microscopic analysis. Field data from intersections of three Indian cities – Jaipur, Bangalore and Trivandrum – is used for the study. PCU values are derived from the field data, by minimising the difference between the observed and the ideal flow profiles. A new saturation flow model is then developed using the regression method. The model is validated with the saturation flows collected from different locations. In addition, the flow predicted by the saturation flow model is used to estimate delay using the HCM and Webster's models, and these delays are compared to the observed delays. The proposed model resulted in lower error compared to the conventional flow estimation techniques.
1 May 2013 in Journal of Computing in Civil Engineering
The traffic flow at intersections is generally chaotic, and signalization is a control measure to reduce this chaos. Heterogeneous traffic at signalized intersections behave much differently from homogeneous traffic. Also, in many countries, nonlane-based traffic prevails; hence, designing control systems for such situations is a challenging task. Traffic simulation helps the analyst to model the behavior of such complex systems. Cellular automata (CA), a recent entrant in traffic flow modeling, represents the traffic flow by means of simple rules, and thus has proved to be a versatile tool in traffic simulation. The present study aims to develop a computationally efficient traffic flow simulation model integrating the concepts of cellular automata and driver-vehicle-objects, thus making a behavioral model of traffic. The model emphasizes the diversity in human behavior, and represents the traffic using the minimal modeling concept of CA. To represent multiple vehicle types, a multicell representa...
Most road surfaces globally are constructed using bituminous materials. The construction of new roads and the maintenance of existing ones demand a huge amount of virgin natural aggregates. Depletion of resources that takes place during the construction of the road has an impact on cost and also on the environment. Hence, there is a need to reduce virgin aggregate use for bituminous pavement construction. This can be achieved by utilizing sustainable materials such as marble waste and reclaimed asphalt pavement (RAP) in hot mix asphalt (HMA)-type road construction. This research work is focused on sustainable development goal (SDG) 12, exclusively on the target number 12.5 which describes the recycling and reuse of materials. However, no investigations were seen to be reported on the integrated utilization of sustainable materials and RAP in bituminous paver blocks. The bituminous mixes were evaluated based on strength and compared with the control mix in this study. Bituminous paver blocks were then cast using sustainable materials and tested in the laboratory to assess the performance of the blocks through a compression test, Cantabro loss test, and wheel rut test. The test results gave satisfactory values; hence, these bituminous blocks can be used for service maintenance of the pavement structures. The study indicates that using sustainable material along with RAP in blocks can provide an eco-friendly, easily maintainable pavement system which makes it a key approach to SDG 9 as well, in terms of innovative infrastructure solutions.