In this paper we conducted an experimental study to evaluate the impact of soiling on the temperature and electricity production of two photovoltaic technologies (Poly-Si and CdTe) under a hot semi-arid climate of Morocco. For this purpose, two modules -from each technology-were exposed for one year where one is cleaned every day and the other is left to accumulate soiling on its surface. In parallel, the electrical parameters, the weather data and the modules temperature were monitored using high precision instruments. Results show that the Poly-Si technology is highly affected by soiling in comparison to the CdTe where the measured daily Soiling ratio (SR) can reach 0.70 and 0.73 respectively. This values lead to a drop on the energy production of 15% for the Poly-Si and 13%. Regarding the modules temperature (Tm) results show that soiling has an impact on increasing the temperature for both technologies, but the Poly-Si module is more affected than the CdTe one, where the daily average temperature difference between the clean and the soiled modules is around 1.5 °C and 1.3 °C for both technologies, respectively.
5 January 2025 in International Journal of Thermofluids
Among the existing solar technologies, Concentrating Solar Power (CSP) stands out as the most efficient and adaptable option for base load applications, primarily due to its thermal storage capabilities. However, despite its potential, the implementation of this technology still lacks competitiveness compared to Photovoltaic (PV) systems. Therefore, optimizing the plant components and operational factors becomes crucial for its cost-effective utilization, particularly in the desert regions of Morocco. Hence, the objective of this study comprised two main aspects: first, to conduct a parametric analysis aimed at selecting the optimal configuration for a parabolic trough collector (PTC)-based power plant suitable for the Moroccan context. Subsequently, an environmental analysis was performed to assess the impact of soiling on the plant operation. This step aimed to refine the precision of the techno-economic analysis and enhance the project’s bankability. High-quality in situ meteorological data and soiling measurements were utilized for these analyses. Furthermore, to ensure the reliability of the results, the results from the employed simulation tool were validated against real data obtained from an operational power plant. The results indicate that Morocco holds significant potential for the integration of large-scale CSP plants. A capacity of 1 MW utilizing PTC technology could yield an annual electricity production of up to 33 GWhe, with a levelized cost of electricity (LCOE) estimated at 0.1465 EUR/kWh. However, accounting for soiling effects in the yield analysis, which is recommended for precise yield calculations, revealed a decrease in the annual production to 28 GWhe for the same 1 MW capacity. This reduction represented a 20% loss from the nominal conditions, resulting in a corresponding increase in electricity cost by 30.6 €/MWh.
15 May 2018 in Modelling and Simulation in Engineering
A simple radial basis function (RBF) meshless method is used to solve the two-dimensional shallow water equations (SWEs) for simulation of dam break flows over irregular, frictional topography involving wetting and drying. At first, we construct the RBF interpolation corresponding to space derivative operators. Next, we obtain numerical schemes to solve the SWEs, by using the gradient of the interpolant to approximate the spatial derivative of the differential equation and a third-order explicit Runge–Kutta scheme to approximate the temporal derivative of the differential equation. For the problems involving shock or discontinuity solutions, we use an artificial viscosity for shock capturing. Then, we apply our scheme for several theoretical two-dimensional numerical experiments involving dam break flows over nonuniform beds and moving wet-dry fronts over irregular bed topography. Promising results are obtained.
The MENA region, with its high solar potential and increasing investments in renewable energy, is transitioning away from fossil fuels toward more sustainable energy systems. To fully benefit from this transition and address issues such as intermittency and energy storage, “green” hydrogen is emerging as a key parameter. When produced using simple and cost-effective technologies like linear Fresnel reflector (LFR), it offers a practical solution. Therefore, assessing the potential of hydrogen production from LFR technology is essential to support the development of the energy sector and promote local industrial growth. This study investigates “green” hydrogen production using a 50 MW concentrated solar power (CSP) system based on LFR technology, where the CSP system generates electricity to power a proton exchange membrane electrolyzer for hydrogen production for three locations, including Ain Beni Mathar in Morocco, Assiout in Egypt, and Tabuk in Saudi Arabia. The results show that Tabuk achieved the highest annual hydrogen production (45.02 kg/kWe), followed by Assiout (38.72 kg/kWe) and Ain Beni Mathar (32.42 kg/kWe), with corresponding levelized costs of hydrogen (LCOH2) of 6.47 USD/kg, 6.84 USD/kg, and 7.35 USD/kg, respectively. In addition, several sensitivity analyses were conducted addressing the impact of thermal energy storage (TES) on the hydrogen production and costs, the effect of reduced investment costs resulting from the local manufacturing of LFR components, and the futuristic assumption of the electrolyzer cost drop. The integration of TES enhanced hydrogen output and reduced LCOH2 by up to 9%. Additionally, a future PEM electrolyzer costs projected for 2030 showed that LCOH2 could decrease by up to 1.3 USD/kg depending on site conditions. These findings demonstrate that combining TES with cost optimization strategies can significantly improve both technical performance and economic feasibility in the MENA region.