Freeze-thaw damage is a typical distress incurred in road and railway engineering in cold regions. Concrete waterproofing layer is commonly used in high-speed railway tracks to prevent the penetration of surface water, however, it cracks easily under thermal stress, especially in cold regions. Recently solutions have been proposed to increase the waterproofing layer’s cracking resistance by using asphalt layers. Nonetheless, the use of emulsified asphalt as well as dense-graded asphalt mixture were not effective enough. To improve the effectiveness, in this study, mastic asphalt was designed for application as the waterproofing layer on the subgrade surface of high-speed railway tracks in cold regions. The overall performance of mastic asphalt was preliminarily evaluated by laboratory tests, then a 200-m test section was constructed for field validation in northeastern China as part of a new high-speed railway line, and water content sensors were placed inside the subgrade to monitor the performance of the mastic asphalt waterproofing layer (MAWL). The subsequent field investigation and monitoring data during the two years operation showed that MAWL dramatically outperformed the conventional concrete waterproofing layer in terms of waterproof performance. Plenty of serious cracks were found in the conventional concrete waterproofing layer, but only a limited number of local cracks were observed in MAWL. As a result, MAWL keeps the water content of subgrade at a stable level. In addition, MAWL showed relatively high stability during the two years investigation period, and no obvious deterioration was observed in the test section.
1 December 2019 in Construction and Building Materials
Asphalt pavement cracking represents a prevalent form of deterioration that significantly compromises road performance and safety under the combined effects of environmental factors and traffic loading. Crack sealing has emerged as a widely adopted and cost-effective preventive maintenance strategy that restores the pavement’s structural integrity and extends service life. This paper presents a systematic review of the development of crack sealing technology, conducts a comparative analysis of conventional sealing materials (including emulsified asphalt, hot-applied asphalt, polymer-modified asphalt, and rubber-modified asphalt), and examines the existing performance evaluation methodologies. Critical failure mechanisms are thoroughly investigated, including interfacial bond failure resulting from construction defects, material aging and degradation, hydrodynamic scouring effects, and thermal cycling impacts. Additionally, this review examines advanced sensing methodologies for detecting premature sealant failure, encompassing both non-destructive testing techniques and active sensing technologies utilizing intelligent crack sealing materials with embedded monitoring capabilities. Based on current research gaps, this paper identifies future research directions to guide the development of intelligent and sustainable asphalt pavement crack repair technologies. The proposed research framework provides valuable insights for researchers and practitioners seeking to improve the long-term effectiveness of pavement maintenance strategies.
1 February 2020 in Construction and Building Materials
Water damage leads to spalling and loosening of asphalt pavement, which is ultimately due to a reduction in the bond strength of the asphalt mastic. The filler, as an important component of the asphalt mastic, has a great impact on the various properties of the asphalt mastic and even the asphalt mix itself. Therefore, it is important to study the influence of fillers on the performance of asphalt mastic. In this paper, the various properties of twelve types of fillers, including mineral powder, mineral powder partially replaced with cement, slaked lime, and recycled powder, and their effects on the bond strength of asphalt mastic are investigated. Binder bond strength (BBS) was used to evaluate the performance of the different asphalt mastics. The moisture resistance of the asphalt mastic was evaluated by measuring the bond strength of the asphalt mastic after treatment in a water bath. A grey correlation analysis was then carried out to derive the relationship between the filler index and the bond strength of the asphalt mastic. The results show that the addition of slaked lime and cement helped to improve the moisture resistance of the asphalt mastic. The fineness modulus and other indicators have a great influence on the bond strength of asphalt mastic. The interaction between hydrothermal coupling and filler type has a non-negligible effect on the moisture resistance of the asphalt mastic.