High molecular polymers have been widely studied and applied in the field of enhanced oil recovery (EOR). At present, the focus of research has been changed to the design of polymer networks with unique properties such as anti-temperature and anti-salinity, good injection and so on. Supramolecular polymers have high viscoelasticity as well as excellent temperature, salt resistance and injection properties. Can supramolecular polymers become another material choice for polymer flooding to enhance oil recovery? The present review aims to systematically introduce supramolecular polymers, including its design strategy, interactions and rheological properties, and address three main concerns: (1) Why choose supramolecular polymers? (2) How do we synthesize and characterize supramolecular polymers in the field of oilfield chemistry? (3) What has been the application progress of supramolecular polymers in improving oil recovery? The introduction of a supramolecular interaction system provides a new idea for polymer flooding and opens up a new research direction to improve oil recovery. Aiming at the “reversible dynamic” supramolecular polymers, the supramolecular polymers are compared with the conventional covalent macromolecular polymer networks, and the challenges and future research directions of supramolecular polymers in EOR are discussed. Finally, the author’s viewpoints and perspectives in this emerging field are discussed.

The research and application of CO₂ storage and enhanced oil recovery (EOR) have gradually emerged in China. However, the vast unconventional oil and gas resources are stored in reservoir pores ranging from several nanometers to several hundred micrometers in size. Additionally, CO₂ geological sequestration involves the migration of fluids in tight caprock and target layers, which directly alters the transport and phase behavior of reservoir fluids at different scales. Micro- and nanoscale fluidics technology, with their advantages of in situ visualization, high temperature and pressure resistance, and rapid response, have become a new technical approach to investigate gas–liquid interactions in confined domains and an effective supplement to traditional core displacement experiments. The research progress of micro–nano fluidics visualization technology in various aspects, such as CO₂ capture, utilization, and storage, is summarized in this paper, and the future development trends and research directions of micro–nano fluidics technology in the field of carbon capture, utilization, and storage (CCUS) are predicted.

Many factors need to be considered in the evaluation of tight conglomerate reservoirs, including the microscopic pore-throat structure, pore connectivity, lithology, porosity, permeability, and clay mineral content. The contents and types of clay minerals reflect the mineral evolution process during the deposition of the reservoir and can reflect the reservoir’s physical properties to a certain extent. In this study, cores from the Baikouquan Formation in Mahu were used to comprehensively analyze the effects of the clay mineral content on the physical properties of a tight conglomerate reservoir, including field emission scanning electron microscopy (FE-SEM), casting thin section observations, X-ray diffraction (XRD), interface property testing, high-pressure mercury injection, low temperature N₂ adsorption, and nuclear magnetic resonance (NMR)-movable fluid saturation testing. The results revealed that differences in different lithologies lead to differences in clay mineral content and pore structure, which in turn lead to differences in porosity and permeability. The interface electrification, adsorption, and specific surface area of the reservoir are positively correlated with the clay mineral content, which is mainly affected by the smectite content. As the clay mineral content increases, the proportion of nanoscale pore throats increases, and the core becomes denser. The saturation of the movable fluid controlled by the >50 nm pore throats in the tight conglomerate ranges from 8.7% to 33.72%, with an average of 20.24%. The clay mineral content, especially the I/S (mixed layer of Illite and montmorillonite) content, is negatively correlated with the movable fluid. In general, the research results clarified the relationship between the lithology and physical properties of clay minerals and the microscopic pore structure of the tight conglomerate reservoirs in the Baikouquan Formation in the Mahu area.

The occurrence state of oil, gas, and water plays a crucial role in exploring shale reservoirs. In this study, molecular dynamics simulations were used to investigate the occurrence states of these fluids in shale nanopores. The results showed that when the alkane is light oil, in narrow pores with a width less than 3 nm, oil molecules exist only in an adsorbed state, whereas both adsorbed and free states exist in larger pores. Due to the stronger interaction of water with the rock surface, the adsorption of oil molecules near the rock is severely prohibited. Oil/water/gas occurrence characteristics in the water-containing pore study indicate that CO₂ gas can drive free oil molecules out of the pore, break water bridges, and change the occurrence state of water. During displacement, the gas type affects the oil/gas occurrence state. CO₂ has strong adsorption capacity, forming a 1.45 g/cm³ adsorption layer on the rock surface, higher than oil’s density peak of 1.29 g/cm³. Octane solubility in injected gases is CO₂ (88.1%) > CH₄ (76.8%) > N₂ (75.4%), with N₂ and CH₄ having weak competitive adsorption on the rock. The investigation of different shale reservoir conditions suggests that at high temperature or low pressure, oil/gas molecules are more easily displaced, while at low temperature or high pressure, they are tightly adsorbed to the reservoir rock. These findings contribute to the understanding of fundamental mechanisms governing fluid behavior in shale reservoirs, which could help to develop proper hydrocarbon recovery methods from different oil reservoirs.