Depolymerization of lignin is an important step to obtain a lignin monomer for the synthesis of functional chemicals. In the context of more lignin produced from biomass and pulp industry, converting real lignin with low purity is still required more studies. In this study, the influence of solvent composition and reaction parameters such as binary solvents ratio, time, and temperature, the solvent-to-lignin ratio on the depolymerization of rice straw lignin was investigated carefully. Essential lignin-degraded products including liquid product (LP), char (solid), and gas were obtained, and their yields were directly influenced by reaction conditions. Results show that the maximum lignin conversion rate of 92% and LP yield of 66% was under the condition of 275°C, 30 min, 75 : 1 (mL solvent/1 g lignin), and ethanol 50%. Gas chromatography-mass spectroscopy (GC-MS) analysis was used for the analysis of the depolymerization products and identified 11 compounds which are mainly phenolic compounds such as 2-ethylphenol, 3-ethylphenol, phenol, methyl 2,4,6-trimethylbenzoate. The structure changes of LP and char in various conditions were analyzed using Fourier-transform infrared (FTIR).
The conversion of rice straw into energy such as dimethyl ether (DME) plays a significant role in driving and improving energy conversion efficiency due to its abundance and eco-friendliness”. Not only is an alternative for fossil fuels, rice straw-derived DME also affects the agriculture-based value chains. In this study, an upgrading DME production process was developed by HYSYS simulation for lower carbon dioxide (CO2) emission and then figured out its feasibility through techno-economic and environmental analysis. Technically, the modelled process generates around 2.3 ton/h of DME with a purity of 99.96% and an energy conversion efficiency (ηDME) of 75%. Otherwise, the additional presence of an off-gas absorber and CHP plant in the process reduced 84% of GHG emissions compared to the conventional process (0.21 kg CO2-eq/kg DME compared to 1.36 kg CO2-eq/kg DME, specifically). The CO2 capture also creates more products for this process and increases carbon efficiency to 94.6% with no CO content in fuel gas leaving the CHP section. The unit production cost (UPC) is estimated at 1,143 USD per ton of DME. These results created a net new positive contribution to commercial DME production, directing the majority of economic activity toward green and sustainable technology.
The global discharge of dye-contaminated effluent into the environment has garnered considerable public attention, and removing the organic pollutants from wastewater is of great importance. Durian shell, a major by-product of Asia countries, is one of the primary causes of environmental issues. To address these current issues, the development of efficient and eco-friendly biomass-derived catalysts that activate advanced oxidation processes (AOP) stands out as a crucial technology for treating organic pollutants in water. In this study, cobalt-doped biochar composites (CoC-n) were synthesized using solvothermal and calcination techniques, with durian shell biomass serving as the precursor material. The obtained CoC-n treated under various calcination temperatures analyzed via SEM, EDS, XRD, and FTIR techniques, which were used for efficient peroxymonosulfate (PMS) activation for up to 92% and 58.98–74.30% RhB (25 and 75 mg/L, respectively) degradation in 30 min. The quenching test performed on the CoC-350/PMS system revealed that RhB degradation involves sulfate (SO4•−), hydroxyl (OH•), and singlet oxygen (1O2) in RhB degradation, with SO4•− and 1O2 being the primary components. The cobalt-doped biochar from durian shells is considered a novel and promising candidate for the eradication of dye-contaminated effluent applications.