Yao Wang

Dr. Yao Wang

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 September 2019 in Science Progress
Verified
Journal Article
Open access
PDF file
SLShujun Li
Shujun Li
WMWenjun Meng
Wenjun Meng
YWYao Wang
Yao Wang
The previous work of the authors indicated that the fluid–solid coupling effect of the magneto-rheological fluid and the brake disc is a necessary focus during braking process. In this study, a novel design of magneto-rheological fluid brake was proposed and studied theoretically and numerically, aiming to solve the prominent problem of heat dissipation, especially in the case of single emergency braking. First, based on the modified Bingham model, a parameter defined as the apparent equivalent viscosity was utilized to represent the relationship of magnetic field, flow field, and temperature field. The braking torque and the formula for calculating the impact factor of fluid–solid coupling employed for characterizing the associations among the thermal field and the stress field were established based on fluid–solid coupling. With a detailed explanation of simulation method, the distribution disciplinarian’s numerical simulation of each field was analyzed using COMSOL software. To validate the accuracy of the established model on the designed magneto-rheological fluid brake, the prototype was also manufactured, and results achieved experimentally which were measured on inertia test system of brake, for braking torque, motion parameters, and surface temperature in braking process, were compared with simulations. Simulation results manifested that the designed magneto-rheological fluid brake’s magnetic circuit structure is feasible based on magnetic induction intensity distribution. Finally, it has been shown that the simulations appear to be basically consistent with the experimental results, and the heat dissipation of the designed magneto-rheological fluid brake is partially improved. These results might contribute to the structure design, optimization, and improvement of magneto-rheological fluid products, extending the previous work on fluid–solid coupling analyses.

5 December 2017 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
YWYao Wang
Yao Wang
SLShujun Li
Shujun Li
WMWenjun Meng
Wenjun Meng
In this study, the formula to calculate the impact factor of fluid–solid coupling (ξ) was proposed in order to describe the fluid–solid strong coupling relationship of the whole system in a more realistic way based on the strong fluid–solid coupling problem between magnetorheological fluid and the surface of a brake disc due to the shearing friction in braking process. The magnetorheological fluid was considered using a Herscher–Bulkley model according to the structural features and fluid properties of the magnetorheological braking system with double coils placed on the side housing. Next, a correlation between the constitutive equations of the mechanical and thermal fields was established by analyzing their interaction parameters. The numerical simulation of the distribution disciplinarian of the mechanical and thermal fields in strong coupling was studied using COMSOL Multiphysics software. Experimental results have been compared with the simulations in terms of the surface temperature in braking process. The mathematical expression on the impact factor of coupling (ξ) depending on braking time (t) has been obtained by a numerical analysis. Simulation results revealed that the impact factor of coupling (ξ) decreased with the braking time (t). However, the change rate of function decreases first and then increases with time. There also exists an inflection point at t = 1.9025 in the function ξ of t and a strong nonlinear coupling relationship between the mechanical and thermal fields based on the inflection point properties of the function is found. In addition, all the maximum relative errors are less than 5%, which also reveals that there is a good agreement between the simulation and experimental results. This work can provide insights useful to solving complex multi-physics problems with strong coupling.

31 October 2019 in The International Journal of Medical Robotics and Computer Assisted Surgery
Verified
Journal Article
Closed access
PDF file
TZTie‐Feng Zhang
Tie‐Feng Zhang
ZFZhuang Fu
Zhuang Fu
YWYao Wang
Yao Wang
WSWei‐Yi Shi
Wei‐Yi Shi
GCGuang‐Biao Chen
Guang‐Biao Chen
JFJian Fei
Jian Fei

11 June 2019 in Mechanical Sciences
Verified
Journal Article
Open access
PDF file
YWYao Wang
Yao Wang
ZFZhuang Fu
Zhuang Fu
The oblique contact-impact characteristic of the composite structural bar composed of Babbitt alloy and low-carbon steel (ZChSbSb11-6 ∕ AISI 1020) with a solid flat surface (AISI 1045) was studied theoretically and experimentally. The dynamic equation of the composite structural bar with vibration response during the contact-impact was established using the momentum theorem and assumed mode method, and the instantaneous contact forces during different impact phases were analyzed based on modified Jackson–Green model. Four sets of experiments (i.e. different proportion of Babbitt, ξ={1/8,1/2,3/4,7/8} ) for the initial angle, θ=45∘ , and different initial velocities were performed; and, the rebound linear and angular velocity of the contact point of composite structural bar after impact was calculated and compared with experimental results. Besides, the coefficient of restitution, the relation of contact force and contact deflection, and the permanent deformation were also compared for the composite structural bars with different proportions in combination, ξ. Three critical angles are found to determine whether the composite bar slides or not, but are prominently different for the composite bars with different ξ. In comparing with the experimental results, the numerical solutions of rebound linear and angular velocity had yield encourage results and, all relative errors were small, indicating that the simulations are in good agreement with the experimental results. Also, the oblique contact-impact behavior involving the coefficient of restitution, the relation of contact force and contact deflection, and the permanent deformation was explained in detail. It can be concluded that as the proportion of Babbitt ξ increases, the composite structural bar presents a characteristic of ease of deflection. And the contact-impact behavior of structural entity is closely related to the inherent properties of the elasto-plastic material, especially for the weak material of composite structures. The more easily the impacting object is deformed, the small the contact force during the contact-impact, which also indicates the yield strength of weak material is a very significant parameter in the event of collision. Such work could give conducive insights to contact-impact problems of the key parts or structures composed of composite materials in mechanical system.

3 October 2018 in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
Verified
Journal Article
Closed access
WMWenjun Meng
Wenjun Meng
YWYao Wang
Yao Wang
Contact-impact between different surfaces is a ubiquitous phenomenon especially in the mechanical systems. Previous work of authors indicated that the effect of longitudinal and/or transverse vibration response during the motion and dynamic modeling cannot be neglected for the elasto-plastic contact-impact events. In this study, further analyses were performed to characterize the contribution of longitudinal and transverse vibration responses during the elasto-plastic oblique contact-impact, and the formula to calculate the influence factor of vibration, ξ, was proposed based on the contact force with different vibrations during the impact. The momentum theorem and assumed mode method were used to develop the equations of motion of a flexible bar with a solid flat surface. Simulation results were compared with experimental results reported in the literature to verify the accuracy of the established model. The tangential and normal velocities of the contact point after the impact were compared with the simulations for different vibration cases, and the comparison between the simulations and the experimental results had yield encourage results. For different elasto-plastic materials, three critical initial impact angles had been found from the simulation to determine whether the flexible bar slides or sticks the flat surface. Although considering the effect of vibration response during the motion and dynamic modeling is very significant, increasing the number of shape functions did not effect the result significantly. The longitudinal and transverse vibration responses were found to effect the normal and tangential velocities of the contact point after the impact, respectively. Moreover, it had been shown that for the oblique contact-impact with sliding, considering the response of longitudinal and transverse vibration at the same time is more reasonable than other cases, which also reveals that, in this case, there is a good agreement between the simulation and experimental results. Besides, the mathematical expression on the influence factor of vibration depending on the initial velocity also had been obtained by a numerical analysis. This work can provide useful insights for dynamic modeling of complex multi-body systems during the contact-impact.

2 September 2020 in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
Verified
Journal Article
Closed access
PDF file
YWYao Wang
Yao Wang
ZFZhuang Fu
Zhuang Fu
ZZZhi-Feng Zhao
Zhi-Feng Zhao
YSYun Shen
Yun Shen
TZTie-Feng Zhang
Tie-Feng Zhang
GCGuang-Biao Chen
Guang-Biao Chen
The robot-assisted insertion surgery plays a crucial role in biopsy and therapy. This study focuses on determining the optimum puncture pattern for robot-assisted insertion, aiming at the matching problem of needle insertion parameters, thereby to reduce the pain for patients and to improve the reachability to the lesion point. First, a 6-degrees of freedom (DOFs) Computed Tomography (CT)-guided surgical robotic system for minimally invasive percutaneous lung is developed and used to perform puncture experiments. The effects of four main insertion factors on the robotic puncture are verified by designing the orthogonal test, where the inserting object is the artificial skin-like specimen with high transparent property and a digital image processing method is used to analyze the needle tip deflection. Next, the various phases of puncture process are divided and analyzed in detail in view of the tissue deformation and puncture force. Then, short discussion on the comparison of puncture force with different effect factors for the same beveled needle is presented. The same pattern can be observed for all of the cases. Finally, based on the experimental data, the formulations of the puncture force and needle deflection which depends on Gauge size, insertion velocity, insertion angle, and insertion depth are developed using the multiple regression method, which can be used to get an optimum puncture pattern under the constrains of minimum peak force and minimum needle tip deflection. The developed models have the effectiveness and applicability on determining the optimum puncture pattern for one puncture event, and which can also provide insights useful for the setting of insertion parameters in clinical practice.