5-CM-Salophen Schiff base was examined as an inhibitor for corrosion of mild steel in 0.5 M hydrochloric acid (HCl). The gravimetric data revealed corrosion inhibition effectiveness of the Schiff base even at low concentrations. Polarization measurements showed that the Schiff base is a mixed-type corrosion inhibitor. The polarization resistance (Rp) increased with increasing the Schiff base concentration. Also, the values of the double-layer capacitance decreased after addition of the inhibitor due to adsorption of the Schiff base on the surface. The inhibition mechanism was investigated by plotting the Langmuir adsorption isotherm and calculating the potential of zero charge (EPZC) for mild steel samples. Scanning electron microscopy (SEM) analysis confirmed the results of the corrosion tests.
29 July 2014 in Protection of Metals and Physical Chemistry of Surfaces
In this paper, the effects of copper ion addition on microstructure, composition, deposition rate and anticorrosive performance of electroless Ni-P coating on AZ61 magnesium alloy have been investigated. Deposits were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray (EDX) techniques. The corrosion behavior of the deposits was studied by Open Circuit Potential (OCP) measurements and Electrochemical Impedance Spectroscopy (EIS) in 3.5 wt % NaCl. Moreover, the deposition rate of the coatings was determined by polarization tests. The results indicate that introduction of Cu2+ improves the characteristics and anticorrosion performance of Ni-P coating.
26 March 2013 in Protection of Metals and Physical Chemistry of Surfaces