Magneto-optical materials are the fundamental component of Faraday isolators; therefore, they are significantly important for solid-state laser systems. Fluoride magneto-optical crystals such as CeF3, KTb3F10 and LiTbF4 exhibit advantages of wide transmittance range, high optical homogeneity, smaller thermal lensing and weaker thermal induced depolarization effect, and thus are promising candidates for Faraday isolators in high-power solid-state lasers. Recent progress in crystal growth and characterizations of these fluoride magneto-optical crystals are introduced. Possible applications of Faraday isolators based on various fluoride crystals are discussed, especially for solid-state lasers in the ultraviolet (UV) or infrared (IR) spectral region.
We demonstrated a passively Q-switched Er:Ca0.8Sr0.2F2 laser with indium tin oxide nanowire arrays as an optical modulator in the mid-infrared region. In the Q-switched regime, the maximum output power of 58 mW with a slope efficiency of 18.3% was acquired. Meanwhile, the minimum pulse duration and highest repetition rate of the stable pulse trains were 490 ns and 17.09 kHz, corresponding to single pulse energy of 3.4 μJ and peak power of 6.93 W, respectively. To the best of our knowledge it was the first time that indium tin oxide nanowire arrays were employed as a saturable absorber to make pulse lasers carried out at 2.8 μm. The experimental data show that indium tin oxide nanowire arrays can be employed as a competitive candidate for saturable absorber in the field of mid-infrared solid-state lasers.