A key issue in physical-layer network coding (PNC) is how to deal with the asynchrony between signals transmitted by multiple transmitters. That is, symbols transmitted by different transmitters could arrive at the receiver with symbol misalignment as well as relative carrier-phase offset. A second important issue is how to integrate channel coding with PNC to achieve reliable communication. This paper investigates these two issues and makes the following contributions: 1) We propose and investigate a general framework for decoding at the receiver based on belief propagation (BP). The framework can effectively deal with symbol and phase asynchronies while incorporating channel coding at the same time. 2) For unchannel-coded PNC, we show that for BPSK and QPSK modulations, our BP method can significantly reduce the asynchrony penalties compared with prior methods. 3) For QPSK unchannel-coded PNC, with a half symbol offset between the transmitters, our BP method can drastically reduce the performance penalty due to phase asynchrony, from more than 6 dB to no more than 1 dB. 4) For channel-coded PNC, with our BP method, both symbol and phase asynchronies actually improve the system performance compared with the perfectly synchronous case. Furthermore, the performance spread due to different combinations of symbol and phase offsets between the transmitters in channel-coded PNC is only around 1 dB. The implication of 3) is that if we could control the symbol arrival times at the receiver, it would be advantageous to deliberately introduce a half symbol offset in unchannel-coded PNC. The implication of 4) is that when channel coding is used, symbol and phase asynchronies are not major performance concerns in PNC.

Direct application of network coding at the physical layer - physical layer network coding (PNC) - is a promising technique for two-way relay wireless networks. In a two-way relay network, relay nodes are used to relay two-way information flows between pairs of end nodes. This paper proposes a precise definition for PNC. Specifically, in PNC, a relay node does not decode the source information from the two ends separately, but rather directly maps the combined signals received simultaneously to a signal to be relayed. Based on this definition, PNC can be further sub-classed into two categories - PNCF (PNC over finite field) and PNCI (PNC over infinite field) - according to whether the network-code field (or groups, rings) adopted is finite or infinite. For each of PNCF and PNCI, we consider two specific estimation techniques for dealing with noise in the mapping process. The performance of the four schemes is investigated by means of analysis and simulation, assuming symbol-level time synchronization only.

This paper proposes and experimentally demonstrates a first wireless local area network (WLAN) system that jointly exploits physical-layer network coding (PNC) and multiuser decoding (MUD) to boost system throughput. We refer to this multiple access mode as network-coded multiple access (NCMA). Prior studies on PNC mostly focused on relay networks. NCMA is the first realized multiple access scheme that establishes the usefulness of PNC in a non-relay setting. NCMA allows multiple nodes to transmit simultaneously to the access point (AP) to boost throughput. In the non-relay setting, when two nodes A and B transmit to the AP simultaneously, the AP aims to obtain both packet A and packet B rather than their network-coded packet. An interesting question is whether network coding, specifically PNC which extracts packet A ⊕ B, can still be useful in such a setting. We provide an affirmative answer to this question with a novel two-layer decoding approach amenable to real-time implementation. Our USRP prototype indicates that NCMA can boost throughput by 100 percent in the medium-high SNR regime (≥10 dB). We believe further throughput enhancement is possible by allowing more than two users to transmit together.