In this paper, the importance of molecular diffusion versus turbulent transport in the moderate or intense low-oxygen dilution (Mild) combustion mode has been numerically studied. The experimental conditions of Dally et al. [Proc. Combust. Inst. 29 (2002) 1147–1154] were used for modelling. The EDC model was used to describe the turbulence–chemistry interaction. The DRM-22 reduced mechanism and the GRI 2.11 full mechanism were used to represent the chemical reactions of an H2/methane jet flame. The importance of molecular diffusion for various O2 levels, jet Reynolds numbers and H2 fuel contents was investigated. Results show that the molecular diffusion in Mild combustion cannot be ignored in comparison with the turbulent transport. Also, the method of inclusion of molecular diffusion in combustion modelling has a considerable effect on the accuracy of numerical modelling of Mild combustion. By decreasing the jet Reynolds number, decreasing the oxygen concentration in the airflow or increasing H2 in the fuel mixture, the influence of molecular diffusion on Mild combustion increases.
Adding nanoparticles to liquid fuel is known to promote its combustion characteristics through improving several thermo-physical properties. This study investigates the effects of adding carbon nanoparticles on thermal conductivity and evaporation rate of liquid jet fuel. Multi-walled carbon nanotubes, activated carbon nanoparticles, and graphene nanoplatelets were added to jet fuel at different concentrations to prepare colloidal suspensions. Thermal conductivity is determined by passing known amounts of heat through a very thin layer of fuel and measuring temperature difference across its thickness. A fiber-supported droplet technique is also used to evaluate evaporation rate due to force convection of a hot inert gas. It is observed that both thermal conductivity and evaporation rate increase as a result of nanoparticle addition. Since there is no radiation heat transfer mechanism, the increase in evaporation rate is concluded to be only due to enhanced thermal conductivity.