Teng Bao

Dr. Teng Bao

Department of Civil and Environmental Engineering, Pusan National University, 2 Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46241, Republic of Korea

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2023 in Water
Verified
Journal Article
Open access
PDF file
XMXiangwu Meng
Xiangwu Meng
Teng BaoTeng Bao
Teng Bao
LHLei Hong
Lei Hong
KWKe Wu
Ke Wu
As one of the primary nodes in the flow of micro-plastics (MPs) in the environment, it is critical to examine and assess the Sewage Treatment, occurrence, and removal of MPs in waste treatment plant (WWTP). This research explored the shape, size, and composition of MPs at various stages of the WWTP process in the south of the city of Hefei, China, in dry and rainy weather conditions, as well as the removal effectiveness of MPs in a three-stage process. The collected MPs were quantitatively and qualitatively examined using an Osmosis electron microscope and micro-FTIR. The pollution risk of MPs in WWTP was assessed using the EU classification, labelling and packaging (CLP) standard and the pollution load index (PLI). The findings revealed that the average abundance of fibrous MPs was greatest in WWTP sewage and sludge, 49.3% and 39.7% in dry weather, and 50.1% and 43.2% in rainy weather, respectively. The average distribution of MPs in the 0–500 μm range was highest in WWTP wastewater and sludge, 64.9% and 60.4% in dry weather and 67.9% and 69.0% in rainy weather, respectively. Finally, the overall removal rate was 87.7% and 83.5%. At the same time, it has been demonstrated that MPs with varied compositions are strongly tied to human activities, and environmental conditions (such as rainy weather) also influence their source. In both dry and wet weather, the amount of polymers and the risk score were linked to the pollution risk of MPs in WWTP. In wet weather, the MPS pollution index was more variable. The pollution indices of MPs in row water and tail water were 2.40 and 2.46, respectively, which were heavily contaminated, and 1.0 and 1.2, which were moderately polluted. MPs in dewatered sludge had severely polluted indexes of 3.5 and 3.4, respectively. As a result, there is still MPs efflux or buildup in sludge during and after the WWTP process, which presents an ecological contamination concern.

23 June 2023 in Water
Verified
Journal Article
Open access
PDF file
LHLei Hong
Lei Hong
XMXiangwu Meng
Xiangwu Meng
Teng BaoTeng Bao
Teng Bao
BLBin Liu
Bin Liu
QWQun Wang
Qun Wang
KWKe Wu
Ke Wu
This study aimed to investigate the distribution of microplastics (MPs) within the Shiwuli River in Hefei, a Chinese inland city. Water and sediment samples were collected during flood season (from May to September) and non-flood season (from October to April) at 10 representative points along the truck stream. The electron microscope, the laser direct infrared chemical imaging system (LDIR), and the scanning electron microscope (SEM) were used to observe and quantify the colour and shape of the MPs, to identify the number, size, and polymer composition of the MPs, and to observe the microstructures of typical MP particles, respectively. The polymer risk index (RI) model and the pollution load index (PLI) model were used to assess the polymer-related risks and the overall extent of MP pollution in the river, respectively. Analysis of MP abundance for different sampling points showed that the water of Shiwuli River had an average abundance of MPs of 8.4 ± 2.5 particles/L during the flood season and 5.8 ± 1.7 particles/L during the non-flood season; the sediment had an average abundance of MPs of 78.9 ± 8.3 particles/kg during the flood season and 63.9 ± 7.1 particles/kg during the non-flood season. The abundance of MPs of different points was investigated. Result show that the more abundances of MPs were found at confluences with tributaries (S4, S5, and S6), where they are also close to the residential and industrial development, while lower values were found in agricultural areas (S8) and wetland ecological regions (S9 and S10). In water, the maximum appeared at S5 with 21.7 ± 4.6 particles/L during the flood season and 15.9 ± 4.2 particles/L during the non-flood season, respectively; the minimum appeared at S9 with 1.8 ± 1.0 particles/L during the flood season and 2.2 ± 0.4 particles/L during the non-flood season, respectively. In sediment, the maximum appeared at S5 with 174.1 ± 10.1 particles/kg during the flood season and 143.6 ± 10.4 particles/kg during the non-flood season, respectively; the minimum appeared at S8 with 10.3 ± 2.8 particles/kg during the flood season and at S9 with 12.1 ± 3.2 particles/kg during the non-flood season, respectively. MP characteristics were also studied. Results show that the MPs mainly exhibited a fibroid morphology (27.90–34%), and red-coloured particles (19.10%) within the smaller size less than 500 μm (38.60%) were more prevalent. Additionally, the result of LDIR scanning shows that a total of eleven types of MP polymers were found in the river water and sediment, including acrylates (ACR), chlorinated polyethylene (CPE), ethylene vinyl acetate (EVA), polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polystyrene (PS), polyurethane (PU), polyvinylchloride (PVC), polyamide (PA), and silicon. The most common particle was PE (19.3–21.6%). Furthermore, the environmental risk assessment demonstrated that the PS polymer posed a Level-III risk in the water samples and a Level-II risk in the sediment samples from the Shiwuli River. The remaining polymer types exhibited Level-I risk. The PLIzone value for water was 2.24 during the flood season, indicating heavy pollution, and 1.66 during the non-flood season, indicating moderate pollution. Similarly, the PLIzone value for sediments was 2.34 during the flood season and 1.91 during the non-flood season, both suggesting a heavy pollution. These findings highlight the potential risk posed by MP pollution in the Shiwuli River to the quality of drinking water sources in Chaohu Lake in Hefei. They provide valuable insights into management, pollution control, and integrated management strategies pertaining to MPs in urban inland rivers in Hefei.

4 October 2021 in Water
Verified
Journal Article
Open access
PDF file
AHAhmad Hosseinzadeh
Ahmad Hosseinzadeh
ANAli Asghar Najafpoor
Ali Asghar Najafpoor
ANAli Asghar Navaei
Ali Asghar Navaei
John L. ZhouJohn L. Zhou
John L. Zhou
Ali AltaeeAli Altaee
Ali Altaee
AHAhmad Hosseinzadeh
Ahmad Hosseinzadeh
This study aimed to assess, optimize and model the efficiencies of Fenton, photo-Fenton and ozonation/Fenton processes in formaldehyde elimination from water and wastewater using the response surface methodology (RSM) and artificial neural network (ANN). A sensitivity analysis was used to determine the importance of the independent variables. The influences of different variables, including H2O2 concentration, initial formaldehyde concentration, Fe dosage, pH, contact time, UV and ozonation, on formaldehyde removal efficiency were studied. The optimized Fenton process demonstrated 75% formaldehyde removal from water. The best performance with 80% formaldehyde removal from wastewater was achieved using the combined ozonation/Fenton process. The developed ANN model demonstrated better adequacy and goodness of fit with a R2 of 0.9454 than the RSM model with a R2 of 0. 9186. The sensitivity analysis showed pH as the most important factor (31%) affecting the Fenton process, followed by the H2O2 concentration (23%), Fe dosage (21%), contact time (14%) and formaldehyde concentration (12%). The findings demonstrated that these treatment processes and models are important tools for formaldehyde elimination from wastewater.

7 October 2015 in Desalination and Water Treatment
Verified
Journal Article
Closed access
DCDONG CHEN
DONG CHEN
CYChao Yu
Chao Yu
Teng BaoTeng Bao
Teng Bao
CZChengzhu Zhu
Chengzhu Zhu
CQChengsong Qing
Chengsong Qing
TCTianhu Chen
Tianhu Chen
Autoclaved aerated concrete particles (AACPs) were developed as alternative for the biofilter carriers. To obtain high biomass concentration, the biogenic stimulating properties of the AACPs were investigated. Meanwhile, the feasibility of using these particles as biological aerated filter media was assessed. The experimental results showed that the removal efficiencies of chemical oxygen demand (CODCr) and total nitrogen (TN) both increased with the increase in the ratio of CODCr to -N (C/N) in the biofilters. It could be demonstrated that the well-developed porous structures of AACPs were conducive to many microbial communities, resulting in an improvement of the permeability of biofilm layers and the pollutant removal efficiencies. The adoption of AACPs in such an environment significantly improved phosphate removal from wastewater. Our findings suggested that AACPs can play significant roles as carriers in simultaneous nitrification and denitrification by biological wastewater treatment systems.

15 October 2015 in Desalination and Water Treatment
Verified
Journal Article
Closed access
Teng BaoTeng Bao
Teng Bao
CDCHEN DONG
CHEN DONG
MWMarie-Luise Wille
Marie-Luise Wille
XZXuehua Zou
Xuehua Zou
RFRay Frost
Ray Frost
DCDONG CHEN
DONG CHEN
Ceramsite is a filter medium used in biological aerated filters (BAF). We prepared iron oxide-based porous ceramsite (IPC) by calcination in an O2 atmosphere with goethite, sawdust, and palygorskite clay. The properties of the IPC were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), thermal properties (TG), X-ray fluorescence (XRF), and porosimetry. Two kinds of IPC and commercial ceramsite (CC) were used in BAFs for the treatment of city wastewater. Goethite, sawdust, and palygorskite clay were used to produce IPC that was satisfactory for city wastewater treatment. IPC BAFs had average total organic carbon, P, TN, and NH3-N removal rates of 67.92, 76.55, 43.15, and 90.71%, respectively, much better than those of CC BAFs. The uniform pore size in IPC, with its many interconnections, made it suitable for microbial growth. IPC appears suitable for use as a BAF ceramsite for simultaneous removal of nitrogen and phosphorus from city wastewater.