In this study, we performed thermal chemical vapor deposition for growing vertically aligned carbon nanotube (VACNT) bundles for a field emitter and applied photolithography for defining the arrangement pattern to simultaneously compare square and hexagonal arrangements by using two ratios of the interbundle distance to the bundle height (R) of field emitters. The hexagon arrangement with R = 2 had the lowest turn-on electric field (E to) and highest enhancement factor, whereas the square arrangement with R = 3 had the most stable field emission (FE) characteristic. The number density can reveal the correlation to the lowest E to and highest enhancement factor more effectively than can the R or L. The fluorescent images of the synthesized VACNT bundles manifested the uniformity of FE currents. The results of our study indicate the feasibility of applying the VACNT field emitter arrangement to achieve optimal FE performance.
The integration of vertically aligned carbon nanotubes (CNTs) onto glass substrates is a critical step toward realizing transparent and microfabrication-compatible electronic devices. The direct synthesis of patterned vertically aligned multi-walled CNTs (MWCNTs) on glass substrates using chemical vapor deposition (CVD) is demonstrated. Photolithographic patterning was employed prior to CNT growth to define the spatial geometry of the vertically aligned MWCNTs, enabling precise control over the emitter layout. A key factor influencing CNT morphology was found to be the thickness of the Al buffer layer. Among the tested thicknesses, an aluminum (Al) buffer layer with a thickness of 5 nm yielded optimal results. This configuration facilitates the growth of highly aligned MWCNTs with an average length of approximately 7 μm and a number density of about 109 cm−2. The patterned MWCNTs exhibit excellent vertical alignment and well-defined hexagonal geometries consistent with photolithographic designs. Field emission measurements further validate the material quality, with patterned vertically aligned MWCNTs demonstrating uniform emission and good temporal stability. These results establish a practical and scalable approach for growing patterned vertically aligned MWCNTs directly on thermally stable glass substrates, offering a promising platform for transparent field emission technologies and CNT-based microsystems.
In this study, an electrode based on transition metal oxide molybdenum trioxide (MoO3) was fabricated and applied to electrochemical biosensing for glucose. In the process of making electrodes with relatively larger specific surface areas, an array of carbon nanotubes (CNTs) was deposited on a silicon substrate, and then, MoO3 was coated on the array of CNTs by chemical vapor deposition to produce a MoO3/CNTs/Si structure of three-dimensional electrochemical biosensing electrodes. Biosensing measurement was carried out in the concentration region from 20 μM to 7 mM of sodium hydroxide (NaOH). The highest sensitivity of 17.4 μA/μM cm2 was measured in the concentration range of 20–100 μM. The correlation coefficient of linear response (R2) was 0.9929, thus showing that MoO3/CNTs/Si is an excellent nonenzymatic glucose electrochemical sensor.
30 January 2018 in Journal of Visualized Experiments
We present a method, the bacterial mineral excretion (BME), for synthesizing two kinds of microcapsules, sodium tungstate and sodium molybdate, and the two metal oxides' corresponding nanoparticles—the former being as small as 22 nm and the latter 15 nm. We fed two strains of bacteria, Shewanella algae and Pandoraea sp., with various concentrations of tungstate or molybdate ions. The concentrations of tungstate and molybdate were adjusted to make microcapsules of different length-to-diameter ratios. We found that the higher the concentration the smaller the nanoparticles were. The nanoparticles came in with three length-to-diameter ratios: 10:1, 3:1 and 1:1, which were achieved by feeding the bacteria respectively with a low concentration, a medium concentration, and a high concentration. The images of the hollow microcapsules were taken via the scanning electron microsphere (SEM). Their crystal structures were verified by X-ray diffraction (XRD)—the crystal structure of molybdate microcapsules is Na2MoO4 and that of tungstate microcapsules is Na2WO4 with Na2W2O7. These syntheses all were accomplished under a near ambient condition.