In order to accelerate the construction of bridge substructure, a socket joint construction that does not require interfaces roughening between the precast columns and the reserved cavity of the precast foundation is raised in this paper. The seismic performance of such fabricated bridge piers was investigated by carrying quasistatic tests on socket circular pier specimens of different embedment depths with a compared cast‐in‐place pier specimen. The experimental results showed that the prefabricated piers with the embedment length larger than 1.0 times the column diameter, featuring smooth interfaces that was free of roughening, had a failure mode of bending damage as well as the cast‐in‐place component. As the embedment depth increases, the seismic performance indexes of the socket bridge pier, including bearing capacity, ductility, and energy dissipation capacity, are improved. The seismic performance indexes of a socket bridge pier specimen with an embedment depth of 1.5 times the column’s diameter in the test are better than the cast‐in‐place one.
In order to obtain the difference of anti-collision performance between the socket assembled bridge pier and integral bridge pier, this research conducted the model test of the bridge piers subjected to vehicle impact. The influence of the socket connection form and structure parameters such as embedment depth, interface roughness, and reserved hole opening size on the response of bridge piers to vehicle collision was analyzed by comparing them with those of the cast-in-place bridge pier. Results show that vehicle speed and socket depth are important factors affecting the dynamic response of socket bridge piers to vehicle crash. The maximum impact force on a bridge pier is obviously affected by the embedment depth of the pier column, but no clear change rule exists between them. The opening size of the reserved cavity affects the impact force slightly when the vehicle speed is low, but gradually increases with the increase in vehicle speed. The damage degree of the bridge pier gradually decreases with the increase in the embedment depth of the pier column and increases with the increase in vehicle speed. The acceleration of the bridge pier tends to increase with the vehicle speed, but no clear law of change with the socket depth exists. The maximum strain of the steel bar at the root of the socket pier is greater than that of the impact position, and the maximum strain distribution of the steel bars of the pier column with the socket embedment depth greater than or equal to 1.0 times diameter of the column is similar to that of the cast-in-place one. The maximum strain of steel bars of the both are at the root of the pier column. The study results provide a data reference for further studying the actual vehicle bumping on socket bridge pier and prefabricated bridge anti-collision design.
11 August 2023 in KSCE Journal of Civil Engineering
The design and evaluation of bridge structural integrity following a collision accident heavily depend on the impact force of the vehicle colliding with the bridge piers. Socket prefabricated piers are commonly used in bridge engineering; however, limited research has been conducted on their impact force. To address this issue, this study employs finite element (FE) simulation to investigate the dynamic force and equivalent static force (ESF) of a vehicle colliding with socket prefabricated bridge columns. The study explores various parameters such as socket connection structural parameters, vehicle condition parameters, and pier parameters. Furthermore, the study evaluates four approaches, including the global average approach, local average approach, peak of the 25 ms moving average approach, and simplified pulse approach, to investigate the ESF. Results show that the impact force of the vehicle is significantly influenced by vehicle factors. Additionally, the socket depth of the pier has a great impact on heavy vehicle impacts. A suitable approach for calculating the ESF of a vehicle impacting socket prefabricated bridge piers was identified, and a corresponding calculation formula was developed. The formula is a function of the vehicle’s mass and velocity and the pier column socket depth, eliminating the need for cumbersome FE analyses.
To ensure that the cementitious grouting material (CGM) layer and existing concrete work together, the interfacial bond strength between CGM and normal concrete substrate was experimentally investigated by conducting direct and slant shear tests. The effects of connection interface form, concrete strength, interface shear key, and shear angle on the bond strength of CGM and normal concrete were discussed in detail. The results showed that for composite specimens, the interfacial bond strength was the highest for the triangular interface form, followed by the trapezoidal interface and smooth interface, which had the lowest. The interfacial bond strength increased as the existing concrete’s strength increased; the interfacial bond strength could be greatly improved under shear load in the slant section or when the shear key was set at the interface. Moreover, the interfacial bond strength increased with the increase in the shear angle. The interfacial bond–slip curves were analyzed, and a bond–slip model of the interface between CGM and concrete was proposed. A certain value of interfacial bond stiffness was also recommended.