Acid mine drainage, produced from sulfur-containing mine waste exposed to air, water, and bacteria, is considered as a serious environmental pollutant because of its extremely low pH and excessive heavy metals. In order to solve the ecological environment problems caused by the acid mine drainage, treatment methods such as neutralization, adsorption, passivation, bio-inhibition, and physical coverage have been developed. Nevertheless, these methods are terminal treatment methods, which are unable to prevent the generation of acid mine drainage at the source. Recently, it is noteworthy that the tailing covering technology is particularly emphasized, owing to its superior source control capability. By reducing the contact with air, water, and bacteria, the oxidation of sulfide tailings is significantly reduced, thus avoiding the production of acid mine drainage. To date, massive research has been studied and parts of technologies have been applied, but the review on the principles, processes, and applications of these technologies are still lacking. Thus, the present review aims to increase the knowledge related to the most relevant application of tailing covering technology with the following aspects: (i) the background, concepts, and performance of tailing covering technology; (ii) the applicable conditions for each tailings coverage system and their advantages and limitations; and (iii) the future perspective of this technology.

Biochar adsorption has emerged as a favorable and environmentally friendly approach for removing metals such as chromium (Cr) from wastewater. However, the use of pristine biochar (PBC) is limited due to its finite adsorptive capacity, selectivity, and potential for secondary pollution. In this study, a novel bifunctionalized magnetic biochar (BMBC) was fabricated by incorporating cystamine as a ligand and glutaraldehyde as a crosslinker into alkali-treated magnetic biochar (MBC). This chemical modification introduced numerous amino groups and disulfide bonds onto the surfaces of BMBC. The biochar adsorbents’ surface morphologies, crystal structures, and texture properties were characterized using SEM, XRD, and N₂ adsorption-desorption techniques. The specific surface area was determined using the BET method. Furthermore, the surface functional groups and elemental compositions before and after adsorption were analyzed using FTIR and XPS, respectively. The results demonstrated higher Cr(VI) removal efficacy of BMBC (100%) than MBC (72.37%) and PBC (61.42%). Optimal conditions for Cr(VI) removal were observed at a solution pH of 2, a temperature of 50 °C, a reaction time of around 1440 min, and an initial adsorbate concentration of 300 mg/L. The sorption process followed a chemical mechanism and was controlled by monolayer adsorption, with a maximum adsorption capacity of 66.10 mg/g at 50 °C and a pH of 2, as indicated by the larger fitting values of the pseudo–second-order and Langmuir models. The positive ∆H^o and ∆S^o values and negative ∆G0 values suggested a spontaneous and endothermic Cr(VI) adsorption process with high randomness at the solid/liquid interface. The removal of Cr(VI) was attributed to the reduction of Cr(VI) into Cr(III) facilitated by the introduced amino acids, sulfur, and Fe(II), electrostatic interaction between Cr(VI) in the solution and positive charges on the adsorbent surface, and complexation with functional groups. The presence of co-existing cations such as Cu(II), Cd(II), Mn(II), and K(I) had little effect on Cr(VI) removal efficiency. At the same time, the co-existence of anions of Cl⁻, NO₃⁻, SO₄²⁻, and HPO₄²⁻ resulted in a 7.58% decrease in the Cr(VI) removal rate. After five consecutive adsorption/desorption cycles, BMBC maintained a high Cr(VI) removal rate of 61.12%. Overall, this novel BMBC derived from rice straw shows great promise as a biosorbent for treating Cr(VI) in wastewater.

Introduction: Numerous studies have examined the intricate correlation between community and residential environments, and their impact on health outcomes. However, the influence of built environment (BE) factors on the mental well-being of older individuals varies across different geographical regions.Methods: This comprehensive systematic review synthesizes research on the association between BE elements and the mental health (MH) of the older adult population. A pool of 2938 studies were reviewed, with 21 studies meeting the inclusion criteria: 17 cross-sectional studies and 4 longitudinal studies.Results: Most of these investigations were conducted in Asian countries and published within the last five years. The findings reveal that the GDS-15 scale is the most commonly used tool for assessing MH outcomes. We have established a quantifiable evaluation framework for BE elements, addressing the limitations of previous studies that relied on subjective perception measurements. Furthermore, a higher proportion of green spaces, improved facility accessibility, and shorter travel times and distances to destinations are positively linked with better MH of older adults.Discussion: While these associations are becoming increasingly evident, research on the effects of density, diversity, and design elements in relation to older adults’ MH remains limited and may varied significantly across different regions. Future research should focus on designing quasi-natural experimental studies to enhance our understanding of the convoluted and elaborate relationship between the BE and MH.