This paper deals with the application of Unmanned Aerial Vehicles (UAV) techniques and high resolution photogrammetry to study the evolution of a landslide affecting olive groves. The last decade has seen an extensive use of UAV, a technology in clear progression in many environmental applications like landslide research. The methodology starts with the execution of UAV flights to acquire very high resolution images, which are oriented and georeferenced by means of aerial triangulation, bundle block adjustment and Structure from Motion (SfM) techniques, using ground control points (GCPs) as well as points transferred between flights. After Digital Surface Models (DSMs) and orthophotographs were obtained, both differential models and displacements at DSM check points between campaigns were calculated. Vertical and horizontal displacements in the range of a few decimeters to several meters were respectively measured. Finally, as the landslide occurred in an olive grove which presents a regular pattern, a semi-automatic approach to identifying and determining horizontal displacements between olive tree centroids was also developed. In conclusion, the study shows that landslide monitoring can be carried out with the required accuracy—in the order of 0.10 to 0.15 m—by means of the combination of non-invasive techniques such as UAV, photogrammetry and geographic information system (GIS).

In this work a detailed analysis of the temporal evolution of the Almegíjar landslide is presented. It is a rock slide located in the Alpujarras region (Granada, Spain) that has developed over the last 30 years. Six datasets and photogrammetric flights corresponding to the years 1956, 1984, 1992, 2001, 2008, and 2010 were surveyed. The more recent flight of 2010 combined an aerial digital camera and a LiDAR sensor and was oriented by means of in-flight data and tie points. This 2010 flight allowed for the generation of a reliable and high-precision Digital Terrain Model (DTM). The other flights were oriented using second-order ground control points transferred from the 2010 flight, and the corresponding DTMs were prepared by automatic matching and subsequent editing from the stereoscopic models. After comparing the DTMs of different dates, it has been observed that the landslide was triggered after 1984 and since then has evolved in an irregular pattern with periods of variable activity. On average, the ground surface dropped more than 8 m in depleted zones and rose nearly 4 m in the accumulation zones, with a velocity catalogued as very slow (about 15–30 cm/year) over a time span corresponding to a degree VIII of diachroneity. The total volume of the mobilized mass of this large contemporary slide was about 300 × 10³ m³.

MODELIZACIÓN Y SIMULACION DE LAS POSIBLES POSICIONES DE LAS ATALAYAS DE LA FORTALEZA DE LA MOTA EN ALCALA LA REAL, MEDIANTE TECNICAS DE ANALISIS VISUAL

Nowadays, one of the techniques more used for documentation of cultural heritage is terrestrial laser scanner (TLS). This kind of instrumental has become essential in this kind of heritage projects. However, in many projects, the captured information by these systems are excessive, which hinders its data processing and information extraction. But when the documentation purpose is limited to the visualization or dissemination, the final products can be simpler than those obtained from the dense point clouds and the resulting detailed models. In this paper it is presented an approach based on TLS data processed with spherical images algorithms. TLS point clouds are used to simulate spherical images allowing the storage, processing, visualization and dissemination of both data and products. This approach has been applied to a real study case in the documentation of the chapterhouse of the Cathedral of Jaén.