Background: Citric acid, an intermediate product of the Krebs cycle, has a wide usage area in the food industry since it has some functions such as acidulant, flavouring agent, preservative and antioxidant. Although molds are the most commonly used microorganisms in the citric acid production, it is known that there are significant advantages of using yeasts. Purpose and scope: The microbial citric acid production mechanism needs to be well understood to make production more efficient. In this study, the yeasts used in the production, fermentation types and the factors affecting production were reviewed with studies. Methodology: Although production of citric acid can be produced by chemical synthesis, the fermentation is preferred because of its low cost and ease of use. More than 90% of citric acid produced in the world is obtained by fermentation. Results: Yarrowia lipolytica , Candida zeylanoides and Candida oleophila are evaluated for citric acid production with substrates such as molasses, glucose, sucrose and glycerol. On the other hand, there is great interest in developing processes with new substrates and/ or microorganisms. Conclusion: Although the microbial strain is an important factor, the factors such as carbon, phosphorus and nitrogen sources, aeration, the presence of trace elements and pH are also parameters affecting the production.
In this study, three Yarrowia lipolytica strains (Y. lipolytica NRRL Y-1094, Y. lipolytica NRRL YB-423 and Y. lipolytica IFP29) were screened for acid-production capacity and the maximum zone-area was formed by Y. lipolytica NRRL Y-1094. The strain was then selected as a potential citric-acid (CA) producer for further studies. The CA production by Y. lipolytica NRRL Y-1094 was optimized using response surface methodology (RSM) and considering three factors, comprising initial pH-value, fermentation time, and initial glucose-concentration. The highest CA-concentration was 30.31 g/L under optimum conditions (pH 5.5, 6 days, and 125 g/L glucose) in shake flasks. It has been reported that this result gives better results than many productions with shake flasks. According to estimated regression-coefficients for CA concentration, the fermentation time had the greatest impact on CA production, followed by the substrate concentration and initial pH-level, respectively. On the other hand, this study is a fundamental step in solving and optimizing the production mechanism of Y. lipolytica NRRL Y-1094, a microorganism that has not yet been used in CA production with a glucose-based medium. The results suggest that future studies can perform higher yields by optimizing other medium constituents and environmental factors.
Byproducts and wastes from the food processing industry represent an important group of wastes generated annually in large quantities. It is important to note that the amount of this waste will increase with industrialization, and effective solutions must be found urgently. Many wastes that cause environmental pollution are evaluated by their low-tech conversion into products with little economic value, such as animal feed and fertilizer. Therefore, the evaluation of food processing waste using effective recycling techniques has become an interesting subject with increasing population, ongoing biotechnological studies, and advances in technology. The conversion of food waste into biotechnological products via fermentation is a sustainable, environmentally friendly, and economical method in line with the principles of green chemistry. This approach promotes the reuse of food waste by supporting the principles of a circular economy and offers sustainable alternatives to fossil fuels and synthetic chemicals. This contributes to reducing the carbon footprint, preserving soil and water quality, and providing economic sustainability through the production of high-value products. In this study, the properties of olive mill wastewater, an important and valuable waste in the olive oil industry, its environmental aspects, and its use in biotechnological applications that integrate green chemistry are evaluated.
In this study, waste sunflower oils were evaluated as substrates for citric acid (CA) production by Yarrowia lipolytica IFP29 (ATCC 20460). This strain was selected based on its capacity to produce organic acids in a selective medium. Attempts were made to optimize the process using the Taguchi statistical method in terms of the oil polarity, oil concentration, fermentation time, and Triton X-100 concentration. The results indicated that Y. lipolytica IFP29 utilized waste sunflower oil as a substrate and produced a maximum CA of 32.17 ± 1.44 g/L. Additionally, Triton X-100 inhibited the production of CA. For this reason, this process could not be optimized. These results were obtained by periodically adjusting the pH with NaOH during the fermentation period. On the other hand, a new experimental design was created without Triton X-100. As a buffering agent, 2-morpholinoethanesulfonic acid monohydrate (MES) was used to prevent a drop in pH; the maximum concentration of CA was found to be 20.31 ± 2.76. The optimum conditions were as follows: 90 g/L of waste sunflower oil with a polarity of 16 and 12 days of fermentation. According to the analysis of variance results, the effects of factors other than polarity on CA production were found to be significant (p < 0.05).