Biocatalyst systems based on biofilms were developed to remove nitrogen and sulfur-containing heterocyclic hydrocarbons using Cobetia sp. strain MM1IDA2H-1 and Rhodococcus rhodochrous. The curli overproducers mutants CM1 and CM4 were derived from Cobetia sp. strain and used to build monostrain biofilms to remove quinoline; and together with R. rhodochrous to simultaneously remove quinoline and dibenzothiophene using mixed biofilms. The quinoline removal using biofilms were 96% and 97% using CM1 or CM4 curli overproducers respectively, whereas bacterial suspensions assays yielded 19% and 24% with the same strains. At the other hand, the simultaneous removal of quinoline and dibenzothiophene using mixed biofilms were respectively 50% and 58% using strains R. rhodochrous with CM1 and 75% and 50% using R. rhodochrous with CM4. Results show that biofilms were more efficient than bacterial suspension assays and that in mixed biofilms the shared surface area by two or more bacteria could affect the final yield.

The simultaneous adsorption of quinoline and 4,6-dimethyldibenzothiophene over adsorbents, based on alumina modified with boron and nickel under ambient temperature and pressure, was studied. The adsorbents were characterized by BET specific surface area, a potentiometric method for the determination of acid strength, electrophoretic migration, and X-ray diffraction. The results showed that the adsorbent containing nickel had better adsorption capacity than the adsorbent modified with nickel and boron, which was attributed to its greater acidity and ability to generate π-complexation between the adsorbent and the molecules. In terms of selectivity, quinoline was more adsorbed than 4,6-dimethyldibenzothiophene in all systems, due to the basic nature of quinoline. The experimental data in all cases were adjusted by three kinetic models (Yoon–Nelson, Yan and Thomas), and the regression coefficients in all models were close to one. Finally, the values of the kinetic constant obtained by the Thomas model were used to relate the adsorption capacity results.