The tracking performance of linear motor (LM) positioners is subject to payload uncertainty and external time-varying disturbances. Conventional robust controllers typically employ a high control gain that is substantially greater than the known a priori upper bound of the disturbance to ensure tracking error convergence. The main disadvantage of those controllers lies in that when the disturbance decreases, the control input is often overly generated, which then results in undesired control chattering effect or even actuator saturation. To overcome this problem, this article develops a robust tracking controller based on barrier function adaptive sliding mode (BFASM) for the LM positioners. The main benefits of BFASM are twofold: first, the controller is designed without the need for any disturbance information; second, its control gain is adaptively adjusted in terms of the amplitude of disturbance and, thus, leads to decreased control input when the disturbance becomes small. Furthermore, a modified barrier function (MBF) is proposed for applications with actuator saturation. It is proved that both the BFASM and MBF-based controllers can ensure the convergence of the tracking error into a prespecified neighborhood of zero in finite time. Experimental results on a real LM positioner demonstrate the superior properties of the developed controllers in comparison with two existing robust control schemes.
30 May 2022 in IEEE Transactions on Intelligent Transportation Systems
Existing visual-based fatigue detection methods usually monitor drivers' fatigue by capturing their facial features, including eyelid movements, yawn frequency and head pose. However, these approaches typically do not take drivers' biological signals into consideration. An accurate model for fatigue detection requires combining both facial behavior and biological data. This paper proposes a novel non-intrusive method for driver multimodal fusion fatigue detection by extracting eyelid features and heart rate signals from the RGB video. The multimodal feature fusion method could significantly increase the accuracy of fatigue detection. Specifically, we established two fatigue detection models based on heart rate and the PERCLOS value respectively with one-dimensional Convolutional Neural Network (1D CNN), where the PERCLOS refers to the percentage of eyelid closure over the pupil. Finally, the outputs of the two models are weighted to achieve the multimodal fusion fatigue detection. Simulation results show that our method yield better performance than traditional methods.
5 September 2022 in IEEE Transactions on Instrumentation and Measurement
Due to the changeable, high-dimensional, nonstationary, and other characteristics of electroencephalography (EEG) signals, the recognition of EEG signals is mostly limited to independent individuals. To deal with these issues, we propose a multidimensional graph convolution network (MD-GCN), which integrates EEG signals’ temporal and spatial characteristics and can classify emotions more accurately. First, we use that the asymmetry of neuron activity in the left and right hemispheres is very important for emotion prediction to initialize the adjacency matrix and perform preliminary edge prediction without considering node features. Then, we perform the feature fusion on the inception network and then input it into the GCN to learn the interrelationship between channels. Finally, we visually analyze the adjacency matrix. To evaluate the performance of the model, we conduct experiments on the SEED dataset and the SEED-IV dataset. The results show that the predefined adjacency matrix method can improve the accuracy of emotion recognition, and the graph convolution has a better performance than the same type of convolution. It also theoretically shows that the emotional state is mainly by the interaction of important brain regions.
The current thyroid ultrasound relies heavily on the experience and skills of the sonographer and the expertise of the radiologist, and the process is physically and cognitively exhausting. In this paper, we report a fully autonomous robotic ultrasound system, which is able to scan thyroid regions without human assistance and identify malignant nod- ules. In this system, human skeleton point recognition, reinforcement learning, and force feedback are used to deal with the difficulties in locating thyroid targets. The orientation of the ultrasound probe is adjusted dynamically via Bayesian optimization. Experimental results on human participants demonstrated that this system can perform high-quality ultrasound scans, close to manual scans obtained by clinicians. Additionally, it has the potential to detect thyroid nodules and provide data on nodule characteristics for American College of Radiology Thyroid Imaging Reporting and Data System (ACR TI-RADS) calculation.
18 March 2021 in IEEE Robotics and Automation Letters
Continuum hyper-redundant manipulators (CHRMs) have been widely applied in aerospace, medical or other fields to complete tasks in narrow and multi-obstacles environments with its unique structural advantages. Due to the redundancy, the inverse kinematics of CHRMs is rather complex and the trajectory planning has always been the focal and challenging point in the research of CHRMs. To tackle this issue, the present study proposes an overall configuration planning method of CHRMs based on the improved artificial potential field (APF) method. The method avoids the complicated inverse kinematics and vastly reduces the computational complexity. First, a virtual guiding pipeline (VGP) with no obstacles inside is constructed based on a known target configuration and the minimum safe distance. The movement of the CHRM is restricted to the pipe by the APF method. Then, we propose a method to construct a guided potential field in the VGP to solve the local minimum problem of the traditional artificial potential field method. Further, to address the issue of contradictory forces in the overall configuration planning, the maximum-work planning strategy is proposed. Finally, simulations are conducted and the results demonstrate the high performance of the method in terms of planning efficiency, environmental adaptability.