Effective strategies to guide cell alignment and the deposition of an oriented extracellular matrix are critical for the development of anisotropic engineered tissues suitable for the repair of ligament defects. Electrospinning is a promising means to create meshes that can align adherent cells, but the effect of fiber mesh architecture on differentiation has not been examined closely. Therefore, the goal of this study was to determine the effect of fiber diameter and the degree of fiber alignment on mesenchymal progenitor cell morphology, proliferation, and ligament gene expression. Specifically, a poly(ester urethane)urea elastomer was electrospun onto rigid supports under conditions designed to independently vary the mean fiber diameter (from 0.28 to 2.3 μm) and the degree of fiber alignment. Bone marrow stromal cells—seeded onto supported meshes—adhered to and proliferated on all surfaces. Cells assumed a more spindle-shaped morphology with increasing fiber diameter and degree of fiber alignment, and oriented parallel to fibers on aligned meshes. Expression of the ligament markers collagen 1α1, decorin, and tenomodulin appeared to be sensitive to fiber diameter and greatest on the smallest fibers. Concurrently, expression of the transcription factor scleraxis appeared to decrease with increasing fiber alignment. These results suggest that the formation of a ligament-like tissue on electrospun scaffolds is enhanced when the scaffolds consist of aligned submicron fibers.
1 October 2008 in Journal of the Mechanical Behavior of Biomedical Materials
Engineered scaffolds simultaneously exhibiting multiple cues are highly desirable for neural tissue regeneration. To this end, we developed a neural tissue engineering scaffold that displays submicrometer-scale features, electrical conductivity, and neurotrophic activity. Specifically, electrospun poly(lactic acid-co-glycolic acid) (PLGA) nanofibers were layered with a nanometer thick coating of electrically conducting polypyrrole (PPy) presenting carboxylic groups. Then, nerve growth factor (NGF) was chemically immobilized onto the surface of the fibers. These NGF-immobilized PPy-coated PLGA (NGF-PPyPLGA) fibers supported PC12 neurite formation (28.0±3.0% of the cells) and neurite outgrowth (14.2 μm median length), which were comparable to that observed with NGF (50 ng/mL) in culture medium (29.Oil.3%, 14.4 μm). Electrical stimulation of PC12 cells on NGF-immobilized PPyPLGA fiber scaffolds was found to further improve neurite development and neurite length by 18% and 17%, respectively, compared to unstimulated cells on the NGF-immobilized fibers. Hence, submicrometer-scale fibrous scaffolds that incorporate neurotrophic and electroconducting activities may serve as promising neural tissue engineering scaffolds such as nerve guidance conduits.
1 April 2011 in Tissue Engineering Part C: Methods
The aim of the present study was to investigate the potential of hydrogel–electrospun mesh hybrid scaffolds as coronary artery bypass grafts. The circumferential mechanical properties of blood vessels modulate a broad range of phenomena, including vessel stress and mass transport, which, in turn, have a critical impact on cardiovascular function. Thus, coronary artery bypass grafts should mimic key features of the nonlinear stress–strain behavior characteristic of coronary arteries. In native arteries, this J-shaped circumferential stress–strain curve arises primarily from initial load transfer to low stiffness elastic fibers followed by progressive recruitment and tensing of higher stiffness arterial collagen fibers. This nonlinear mechanical response is difficult to achieve with a single-component scaffold while simultaneously meeting the suture retention strength and tensile strength requirements of an implantable graft. For instance, although electrospun scaffolds have a number of advantages for arterial tissue engineering, including relatively high tensile strengths, tubular mesh constructs formed by conventional electrospinning methods do not generally display biphasic stress–strain curves. In the present work, we demonstrate that a multicomponent scaffold comprised of polyurethane electrospun mesh layers (intended to mimic the role of arterial collagen fibers) bonded together by a fibrin hydrogel matrix (designed to mimic the role of arterial elastic fibers) results in a composite construct which retains the high tensile strength and suture retention strength of electrospun mesh but which displays a J-shaped mechanical response similar to that of native coronary artery. Moreover, we show that these hybrid constructs support cell infiltration and extracellular matrix accumulation following 12-day exposure to continuous cyclic distension.