Vehicular crowd sensing systems are designed to achieve large spatio-temporal sensing coverage with low-cost in deployment and maintenance. For example, taxi platforms can be utilized for sensing city-wide air quality. However, the goals of vehicle agents are often inconsistent with the goal of the crowdsourcer. This inconsistency decreases the sensing coverage quality and thus impairs the quality of the collected information. A simple approach to reduce the inconsistency is to greedily incentivize the vehicle agents to different regions. However, incentivization brings challenges, including the heterogeneity of desired target distributions, limited budget to incentivize more vehicle agents, and the high computational complexity of optimizing incentivizing strategies. To this end, we present a vehicular crowd sensing system to efficiently incentivize the vehicle agents to match the sensing distribution of the sampled data to the desired target distribution with a limited budget. To utilize the budget efficiently, we design a customized incentive by combining monetary incentives and potential task(ride) requests at the destination. Meanwhile, an efficient optimization algorithm, iLOCuS, is presented to plan the incentivizing policy for vehicle agents to decompose the sensing distribution into two distinct levels. Our experimental results based on real-world data show that our system reduced 26.99% dissimilarity.
24 October 2014 in Earthquake Engineering & Structural Dynamics
This paper introduces three wavelet-based damage-sensitive features (DSFs) extracted from structural responses recorded during earthquakes to diagnose structural damage. Because earthquake excitations are nonstationary, the wavelet transform, which represents data as a weighted sum of time-localized waves, is used to model the structural responses. These DSFs are defined as functions of wavelet energies at particular frequencies and specific times. The first DSF (DSF1) indicates how the wavelet energy at the original natural frequency of the structure changes as the damage progresses. The second DSF (DSF2) indicates how much the wavelet energy is spread out in time. The third DSF (DSF3) reflects how slowly the wavelet energy decays with time. The performance of these DSFs is validated using two sets of shake-table test data. The results show that as the damage extent increases, the DSF1 value decreases and the DSF2 and DSF3 values increase. Thus, these DSFs can be used to diagnose structural damage. The r...
Individual perspiration level indicates a person’s physical status as well as their comfort level. Therefore, continuous perspiration level measurement enables people to monitor these conditions for applications including fitness assessment, athlete physical status monitoring, and patient/elderly care. Prior work on perspiration (sweat) sensing required the user either to be static or to wear the adhesive sensor directly on the skin, which limits users’ mobility and comfort. In this paper, we present a novel conductive thread-based textile sensor that measures an individual’s on-cloth sweat quantity. The sensor consists of three conductive threads. Each conductive thread is surrounded by a braided cotton cover. An additional braided cotton cover is placed outside the three conductive threads, holding them in a position that is stable for measurement. the sensor can be embedded at various locations on a person’s clothing. When the person sweats, the cotton braids absorb the sweat and change the conductivity (resistance) between conductive threads. We used a voltage dividing circuit to measure this resistance as the sensor output (DC). We then conducted a sensor calibration to map this measured voltage to the quantity of electrolyte solution (with the same density as sweat) applied to the sensor. We used this sensor to measure individuals’ perspiration quantity and infer their perceived perspiration levels. The system is able to limit the average prediction error to 0.4 levels when compared to five pre-defined perceived perspiration levels.
2 August 2011 in Earthquake Engineering & Structural Dynamics