Not availableAndreas Pfahl, Joe Coventry, Marc Röger, Fabian Wolfertstetter, Juan Felipe Vásquez-Arango, Fabian Gross, Maziar Arjomandi, Peter Schwarzbözl, Mark Geiger, Phillip Liedk

Flux density measurement applied to central receiver systems delivers the spatial distribution of the concentrated solar radiation on the receiver aperture, measures receiver input power, and monitors and might control heliostat aimpoints. Commercial solar tower plants have much larger aperture surfaces than the receiver prototypes tested in earlier research and development (R&D) projects. Existing methods to measure the solar flux density in the receiver aperture face new challenges regarding the receiver size. Also, the requirements regarding costs, accuracy, spatial resolution, and measuring speed are different. This paper summarizes existent concepts, presents recent research results for techniques that can be applied to large-scale receivers and assesses them against a catalog of requirements. Direct and indirect moving bar techniques offer high measurement accuracy, but also have the disadvantage of large moving parts on a solar tower. In the case of external receivers, measuring directly on receiver surfaces avoids moving parts and allows continuous measurement but may be not as precise. This promising technique requires proper scientific evaluation due to specific reflectance properties of current receiver materials. Measurement-supported simulation techniques can also be applied to cavity receivers without installing moving parts. They have reasonable uncertainties under ideal conditions and require comparatively low effort.

Solar thermal energy generation needs receiver technologies which can drive highly efficient turbines and decouple the collection of energy from its use by an economic storage technology. High-temperature solid particle receivers for solar tower systems with particle storage are one option. Important issues regarding high-temperature particle receivers are minimization of convective losses, no particle loss due to susceptibility to wind, and high efficiency also in part-load operation. A design approach facing these challenges is the face-down receiver using recirculation of particles. A screening performance analysis studying different recirculation patterns is presented. Using smart recirculation schemes, high receiver efficiencies can be maintained also at part-load operation (100% load ∼90%; 50% load ∼86%; 20% load ∼67%). Simulations of the face-down geometry yield total annual solar-to-electric efficiencies of 24% using a surround field. From the analyses, it can be concluded that solid particle receivers using smart recirculation patterns are a viable receiver option for storage and high-temperature high-efficiency turbine processes.