We demonstrate the use of a novel, integrated THz system to obtain time-domain signals for spectroscopy in the 0.1–1.4 THz range. The system employs THz generation in a photomixing antenna excited by a broadband amplified spontaneous emission (ASE) light source and THz detection with a photoconductive antenna by coherent cross-correlation sampling. We benchmark the performance of our system against a state-of-the-art femtosecond-based THz time-domain spectroscopy system in terms of mapping and imaging of the sheet conductivity of large-area graphene grown by chemical vapor deposition (CVD) and transferred to a PET polymer substrate. We propose to integrate the algorithm for the extraction of the sheet conductivity with the data acquisition, thereby enabling true in-line monitoring capability of the system for integration in graphene production facilities.
The shipping industry is a major contributor to global greenhouse gas (GHG) emissions, which is why it is important to optimize every aspect of the efficiency of ocean-going vessels. This includes the antifouling paint that ensures hydrodynamic efficiency. Measuring the thickness of the antifouling on top of all other paint layers using THz cross-correlation spectroscopy (THz-CCS) underwater could enable vessel operators to monitor the state of the paint on ship hulls and plan any vessel’s sailing route and maintenance optimally. However, due to the high absorption of water in the THz domain, measuring through any significant amount of water is impossible, making a water removal method necessary. This study shows how a THz-CCS system can be packaged for underwater measurements using a molded silicone contact seal. In combination with a spectroscopic model for data treatment, the thickness of a single paint layer is retrieved underwater. This paves the way for a more advanced system capable of measuring multilayer maritime paint underwater, which will enable shipping companies to continuously monitor the paint layers’ thickness.
This study explores the application of Terahertz Cross-Correlation Spectroscopy (THz-CCS) for non-contact and non-destructive quality control in the production of printed electronics. A total of 27 inkjet-printed samples were prepared using a particle-free silver ink with varying numbers of layers and sintering durations. The samples were printed on flexible polyamide substrates and measured in transmission and reflection geometries. In the transmission geometry, THz measurements were used to extract the conductivity of the samples by applying a spectroscopic multilayer model, where the conductivity of silver was modeled using the Drude model. The reflection geometry was used to identify an example of a poorly conductive sample by analyzing the peak-to-peak amplitude (p2p) of the measured THz-CCS signal. Finally, the potential for increasing acquisition speeds to achieve inline quality control at 1 kHz is outlined.