Through-wall imaging/sensing using a synthetic aperture array technique is studied by employing ultrawideband antennas and for wide incidence angles. The propagation through building walls, such as brick and poured concrete in response to point sources near the walls, is simulated by using high-frequency methods. Reciprocity is used to find the responses of point targets behind walls, which are then used to simulate the synthetic aperture radar (SAR) imaging through the walls. The effect of building walls on the target-image distortions is investigated by simulations and measurements. It is shown that by using the idea of match filtering, the effect of the wall can be compensated for, and the point target response can be reconstructed, provided that the wall parameters are known. An optimization method based on minimization of squared error in the SAR image domain within an area confined within the expected point-spread function is used to estimate the wall parameters and sharpen the image simultaneously. A controlled experiment within the laboratory environment is performed to verify the methods presented. It is shown that for an ultrawideband system operating over a frequency band of 1-3 GHz, highly distorted images of two point targets in close proximity of each other behind a wall can be resolved after refocusing. A dual-frequency synthetic method is also presented that can improve the cross-range resolution of the refocused image.
28 December 2011 in IEEE Antennas and Wireless Propagation Letters
In this letter, a printed circularly polarized omnidirectional Y-shaped monopole antenna for possible satellite and terrestrial applications is presented. The proposed antenna incorporates the desirable features of wire turnstile antennas while eliminating external coupler networks used in those antennas. Furthermore, the antenna structure is extremely simple and durable, occupies relatively small space, and resists breakage. The antenna is matched to a 50-Ω coaxial cable without any requirement for an external matching. The fabricated antenna operates over the frequency band of 2250-2350 MHz and provides both senses of circular polarization simultaneously resulting in a superior performance over the frequency band of operation.
18 March 2019 in IEEE Transactions on Antennas and Propagation
This paper provides compact, insightful and convenient formulas to compute the scattering of electromagnetic waves by cylindrical metasurfaces – forming two-dimensional porous cavities – of arbitrary cross section. These formulas are obtained by a combination of integral equations (IE) and Generalized Sheet Transition Conditions (GSTCs) involving bianisotropic susceptibility tensors. They are validated by two application examples – penetrable cloaking, with circular and rhombic shapes, and illusion scattering, with an elliptic shape – upon comparison with specifications in exact synthesis. The penetrable cloaking metasurface cavity is introduced here as a new form of cloaking, which is more realistic than transformation-electromagnetics cloaking while providing comparable performance for a given direction of wave incidence and an a priori known object to conceal. Amonoanisotropic metasurface requires gain for perfect cloaking, but a purely passive approximation of it, practically more accessible, still provides remarkable extinction cross section reduction. Moreover, introducing proper bianisotropy leads to perfect cloaking while keeping the metasurface structure purely passive and lossless.
19 February 2018 in IEEE Transactions on Biomedical Engineering
In this paper, a working ultrawideband (UWB) microwave imaging (MI) system using basic techniques is proposed to detect and localize a tumor model. The system harnesses the time reversal-decomposition of time reversal operator (DORT) signal processing method. We suggest a modified background Green's function and suitable spiral antennas for time reversal imaging of a breast cancer tumor. In this method, scatterings from a breast phantom are measured. Then, reflected signals are processed using the decomposition of time reversal (TR), known under French acronym DORT, algorithm. In a conventional TR imaging method, free-space Green's function is used for detection. However, in the present method, we employ cylindrical Green's functions of a two-layer medium. This makes a better model of the background medium for TR-DORT imaging. Also, the performance of TR-DORT detector against signal to clutter ratio, and its ability to detect and localize different shapes, sizes, and permittivity values of breast tumor are discussed. Furthermore, a fatty tissue phantom model is used to verify the results experimentally. The MI system is tested to localize a tumor within the breast Debye phantom at the frequency range of 3.1–10.6 GHz. The experimental results show the validity of our proposed system.
12 August 2010 in IEEE Geoscience and Remote Sensing Letters
In this letter, the ability of differential evolution (DE) stochastic searching algorithm in front shape reconstruction of 2-D conducting targets hidden behind a homogeneous building wall is shown using simulated backscattered fields, calculated at different frequency and observation points. The target shapes are approximated by the cubic B-spline curves and the targets' equivalent surface currents are computed numerically using method of moments impedance matrix. Simulations show that DE algorithm can successfully reconstruct the wall parameters (i.e., permittivity, conductivity, and thickness) together with target front shape and location for moderate values of signal to clutter and signal to noise power ratios.
29 July 2014 in IEEE Transactions on Antennas and Propagation
The Kobayashi potential (KP) method is a fast and powerful semianalytical technique which can be used to find the scattered field of canonical objects. In this paper, the KP method is used to study the electromagnetic scattering from a 2-D loaded groove in a ground plane coated by a dielectric layer for transverse-electric and transverse-magnetic polarizations. Initially, the problem is solved for the electromagnetic fields in the dielectric layer. Then, the field contribution from the groove is expressed in terms of Bessel eigenfunctions in air, dielectric layer, and the groove. After applying the KP method and by using the Weber-Schafheitlin discontinuous integrals, the governing equations of infinite summations with unknown coefficients are obtained. The summations are effectively truncated with high numerical accuracy. Subsequently, boundary conditions are applied to determine the unknown coefficients. The finite-element method and convergence analysis are used for validation. Finally, the influence of the lossy coating dielectric layer and filling material on the scattered field is investigated.