In order to ensure smooth and uninterrupted flow of oil and gas to the end users, it is imperative for the field operators, pipeline engineers, and designers to be corrosion conscious as the lines and their component fittings would undergo material degradations due to corrosion. This paper gives a comprehensive review of corrosion problems during oil and gas production and its mitigation. The chemistry of corrosion mechanism had been examined with the various types of corrosion and associated corroding agents in the oil and gas industry. Factors affecting each of the various forms of corrosion were also presented. Ways of mitigating this menace with current technology of low costs had been discussed. It was noticed that the principles of corrosion must be understood in order to effectively select materials and to design, fabricate, and utilize metal structures for the optimum economic life of facilities and safety in oil and gas operations. Also, oil and gas materials last longer when both inhibitors and protective coatings are used together than when only batch inhibition was used. However, it is recommended that consultations with process, operations, materials, and corrosion engineers are necessary in the fitness of things to save billions of dollars wasted on corrosion in the oil and gas industries.

Over the decades, corrosion has resulted in loss of lives accorded with damage costs in almost all engineering fields. Thus, it is seen as an environmental threat with catastrophic attributes, which calls for day-to-day research on its final resolution. Recent studies have proven organic green corrosion inhibitors (OGCIs) from plant extracts with biodegradable, environmentally accommodative, relatively cheap, and nonharmful features as the most perfect approach of tackling the problem. This review gives succinct discussion on the mechanisms, classifications, and active functional groups of OGCIs. Measuring ways and factors influencing their efficiency are presented. Also, various plant extracts used as OGCIs in preventing material corrosion in corrosive media coupled with their respective findings, applied characterization techniques, and future challenges are presented. The significance of values obtained from simulating presented mathematical models governing OGCI kinetics, adsorption isotherm, and adsorption thermodynamics is also included. In conclusion, recommendations that will broaden the usage of OGCIs from plant extracts for inhibiting corrosion of materials are presented for prospective researchers in the field of corrosion.

In the past, lives and wealth have been lost due to corrosion in almost all engineering fields. Not only this, the cost of reviving damaged equipments in the industry due to corrosion contributed a lot to the gross domestic product of a nation. Thus, all hands must be on desk to combat this harzadous act via time to time research on its final resolution. However, current research works have revealed effective and reliable corrosion inhibitors from pharmaceutical drugs, plant extracts and ionic liquids as organic green corrosion inhibitors (OGCIs) with accommodative attributes such as being environmentally friendly, readily available, biodegradable, non-harmful, relatively cheap and many others to mention a few. This paper opens readers mind into the detailed classifications, mechanisms and active functional groups of these eco-friendly OGCIs. Not only the corrosion efficiency calculation ways but also influencing factors on efficiency were presented. Plant extracts, pharmaceutical drugs, ionic liquids and synthetic inhibitors, as among major sources of OGCIs, used in preventing material corrosion in corrosive media were separately and comprehensively examined. The significance of values obtained from simulating presented mathematical models governing OGCIs kinetics, adsorption isotherm and adsorption thermodynamics was also included. In conclusion, beneficial recommendations for both current and prospective researchers in the field of Corrosion Engineering were presented.

This paper gives detailed comprehensive review of atmospheric assessment of particulate matter and heavy metals. Previous research works executed on this subject matter in the past four decades were adequately scrutinized. Various equipments for assessing atmospheric particulate matter and heavy metals were presented. Mathematical modeling equations for source apportionment and characterization, deposition rate prediction and health risk characterization of PM₁₀ were also presented. However, the following conclusions were made: (1) there is need for improvement on the mathematical models by reducing the number of assumptions made in developing them. (2) Comparative analysis of concentrations of heavy metals in the atmosphere under the same environment for different methodologies should be executed for accuracy purposes. (3) Cost implication of assessing, monitoring and controlling these unfriendly substances should be examined, and hence, involvement of cost engineers may be of immense help. (4) Further research works should be done on Air-Q 2.2.3 model currently identified as a new methodology for provision of quantitative data on the impact of particulate matter exposure on the health of people. (5) Compliance monitoring networks should be designed to ease data collection for the observables, locations and time periods that allowed receptor models to be applied. (6) There is need for much more research works that enable optimal control and regulation of emission of heavy metals into the atmosphere in order to reduce health effects of these inhalable substances.

This study investigated groundwater quality collected from two industrial and residential locations in each of Lagos metropolis. Prescribed standard procedures of American Public Health Association were used to measure physico-chemical parameters of each of the groundwater samples which include pH, EC, DO, TDS, BOD, COD, anions (Cl⁻, NO₃⁻, SO₄²⁻, PO₄³⁻) and heavy metals (Cu, Zn, Pb, Mn, Fe, Co, Cd and Cr). From laboratory analysis, measured physico-chemical parameters were within the permissible ranges specified by the WHO and NSDWQ except pH, TDS, EC, Pb, Mn and Fe for groundwater samples from industrial locations and pH, Pb, Mn and Fe for residential locations. Higher concentrations of TDS and EC reported for groundwater samples from industrial locations were attributed to heavy discharge of effluents from industrial treatment plants as well as dissolution of ionic heavy metals from industrial activities of heavy machines. Statistical Pearson’s correlation revealed physico-chemical parameters of water quality to be moderately and strongly correlated with one another at either p < 0.05 or < 0.01.

The increase in world population growth and its resultant increase in industrial production to meet its need, have continued to raise the volume of wastewater received by treatment plant facilities. This has expectedly, led to an upsurge in the volume of sewage sludge and biosolids generated from wastewater treatment systems. Biosolids are best managed by application on land because of their agronomic benefits. However, this usage has been discovered to negatively affect humans and impact the environment due to the accumulation of minute concentrations of contaminants still present in the biosolid after treatment, hence the need for government regulations. This review article examined the fate and effects of pollutants, especially persistent organic pollutants (PoPs) of concern and emerging contaminants found in biosolids used for land applications, and also discussed government regulations on biosolid reuse from the perspectives of the two major regulations governing biosolid land application-the EU's Sludge Directive and USEPA's Part 503 Rule, in an attempt to draw attention to their outdated contents since enactment, as they do not currently meet the challenges of biosolid land application and thus, require a comprehensive update. Any update efforts should focus on USEPA's Part 503 Rule, which is less stringent on the allowable concentration of biosolid pollutants. Furthermore, an update should include specific regulations on new and emerging contaminants and persistent organic pollutants (PoPs) such as microplastics, pharmaceutical and personal care products (P&PCPs), surfactants, endocrine-disrupting chemicals, flame retardants, pathogens, and organic pollutants; further reduction of heavy metal standard limits, and consideration of soil phosphate-metal interactions to regulate biosolid agronomic loading rate. Future biosolid research should focus on the concentration of TCS, TCC, and emerging pharmaceuticals, as well as Microplastic transport in biosolid-amended soils, soil-plant transfer mechanism, and metabolism of PFAs in the soils; all of which will inform government policies on biosolid application on land.