Single-gear-ratio plug-in hybrid vehicles (SRPHEVs) are favored by major manufacturers due to their excellent energy-saving potential, simple structure, ease of maintenance and control, great cost-saving potential, and the benefits of vehicle lightweighting. Implementing an energy management strategy (EMS) is the key to realizing the energy-saving potential of PHEVs. In this paper, based on a newly developed coaxial configuration, P1-P3 SRPHEV, with the purpose of reducing PHEV fuel consumption, the advantages of various methods were synthesized. An improved intelligent optimization algorithm, the Particle Swarm Optimization (PSO) algorithm, was used to find the optimal rule-based strategy parameters. The PSO algorithm could be easily adjusted to the parameters and obtains the desired results quickly. Different long-distance speed profiles tested under real-world driving cycle (RDC) conditions were used to validate the fuel savings. And an energy flow analysis was conducted to further investigate the reasons for the algorithm optimization. The results show that the optimization plans of the PSO algorithm in different cycle conditions can improve the equivalent fuel consumption of vehicles in different long-distance conditions. Considering the optimization effect of the equivalent fuel consumption and actual fuel consumption, the best case of the equivalent fuel consumption is improved by 2.98%, and the actual fuel consumption is improved by 2.37%. Through the energy flow analysis, it is found that the energy-saving effect of the optimization plan lies in the following principle: lowering the parallel mode switching threshold to increase the parallel mode usage time and to reduce the fuel–mechanical–electrical transmission path loss, resulting in increasing the energy utilization of the whole vehicle.
2 December 2021 in Journal of Energy Resources Technology
Under abuse conditions, the temperature of lithium-ion battery increases rapidly and brings high safety risk. To monitor the high temperature incident of battery with a simple and reliable method, a novel design scheme was presented and validated by thermal numerical calculation, in which phase change material (PCM) block is bonded with the battery shell and gets melt down when the battery temperature exceeds its phase-transition point. The melting process is irrecoverable and can be perceived by easy visual observation. Computation results show that the temperature rising of the PCM block gets slower when it meets the melting point, but it generally increases synchronously with the shell of the battery and can be used to reflect the temperature rising of the inner cell. Thus the design scheme is valid, and may possess a good applied perspective in the after-sales maintenance and second-hand transactions of lithium-ion battery.
The turbocharger, a key component in a vehicle’s powertrain, results in insufficient accuracy if it does not fully consider the unsteady flow effects of the intake and exhaust systems. Based on the difference between the turbocharger’s actual operating performance with unsteady flow and the corresponding steady flow performance, unsteady flow correction concepts and correction methods for the compressor and turbine were put forward, and the correction of the internal joint operation curve was investigated. The results show that when unsteady correction coefficients were added to both ends of the turbocharger and the optimized structure was used at both ends, the original turbocharger’s surge margin was reduced by 4.6% to 11.8%, and that of the optimized turbocharger was reduced by 15.2% to 21.9% in the medium–low-speed range. Meanwhile, the unsteady flow energy utilization coefficient of the optimized turbocharger was more than 14.5% higher than that of the original turbocharger in the medium–low speed range, and the energy utilization advantage was obvious. It indicated that the optimized turbocharger was working earlier, and the engine’s medium–low-speed admission performance has been obviously improved. Therefore, compared with the steady curve, the corrected unsteady curve was closer to the actual engine performance.