For photoelectric theodolite, the mirror is the core optical component, so it is of great significance to design and optimize a mirror with excellent overall performance. In order to comprehensively consider the contradictory objectives of mass, natural frequency, and RMS under gravity, a multiobjective optimization method based on the performance analysis of two-parameter coupling was proposed. On the basis of the performance law, a suitable solution for balancing multiple objective functions is obtained by introducing manual intervention. The results show that compared with the traditional empirical design of mirrors, the first-order natural frequency, mass, and RMS performance of the optimized mirror are improved by 18.64%, 0.1%, and 15.58%, respectively. The frequency/Mass ratio and 1/(RMS*Mass) ratio are increased by 18.72% and 18.59%, respectively. Its comprehensive performance has been improved. This method is effective and provides a reference for the design of photoelectric theodolite and other mirrors.

To improve maneuverability, the focus of photoelectric theodolites is on reducing the weight of the primary mirror and enhancing its optical performance. This study uses MOAT and Sobol methods to identify key parameters that affect design. Using the high-sensitivity part as the optimization domain, six optimization results were obtained based on the multi-objective SIMP topology optimization method and synthesized into a compromise optimization structure. The performance of the mirror before and after optimization was compared on the opto-mechanical–thermal level. Modal analysis shows the optimized structure has a first natural frequency of 716.84 Hz, indicating excellent stiffness and avoiding low-frequency resonance, with a 30.37% weight reduction. Optical performance is also improved, with a 6 μm reduction in the spot diagram radius and an 8.95 nm decrease in RMS. Simulations under real-world conditions show that the lightweight mirror performs better in resisting gravity deformation and maintaining imaging quality. At maximum thermal deformation, the spot diagram radius of the optimized mirror is 1521.819 μm, with only a 0.145% difference in imaging quality compared to the original. In conclusion, the optimized structure shows comprehensive advantages. Constructing the optical system components and the real physical environment of the site provides a valuable reference for the optimization and analysis of the mirror.

In this paper, the electronic structure and photoelectric properties of graphdiyne nanotubes with armchair (A-GDYNT) and zigzag (Z-GDYNT) types have been studied. Calculations show that as n decreases, the divergence in gap values between (n)-A-GDYNT and (n)-Z-GDYNT increases. This is mainly attributed to the edge effect arising from their different boundaries. Plasmon spectra are generated in all three directions of X, Y, and Z, with the spectra along the Z direction being more prominent. The optical absorption process exhibits not only the nonlinear nature of the GDYNTs, but also a good regularity, especially in the infrared region. As the pore size increases, the A-GDYNT and Z-GDYNT exhibit striking differences in how their charge self-organizes. Likewise, notable distinctions emerge in the evolutionary pattern of their charge difference density under excitation. The porous structure and excellent sorption ability in various light regions make GDYNTs have great potential application in the field of photocatalysis and far infrared detection.

As a critical component of ultra-high flux gene sequencing imaging system, high speed and high precision stepping scanning platform is used to carrying the gene chips to be measured, and it is also the core component for ensuring the high flux and high accuracy of sequencing instrument. In this paper, taking the high speed and high precision stepping scanning platform in ultra-high flux gene sequencing imaging system as design objective, the research work is carried out from three aspects, i.e., the design of platform overall architecture, the design of dynamic response analysis on system-level structure, and the design of high precision positioning control system, utilizing the optimized design of coupling topology between continuum and discrete body, the high precision vibration test and modal analysis method, variable structure anti-saturation precision control, as well as other key techniques. Finally, a high speed and high precision stepping scanning platform of long-stroke is developed successfully, with stepping speed of 200mm/s, stepping acceleration of 9.8m/s², stable stepping control precision of 150nm, stable stepping duration of 100ms, and the total stepping stroke of 200mm. It lays a solid foundation for the popularization and application of stepping scanning platform in ultra-high gene sequencing instrument.