The main source of commercial chitosan is the extensive deacetylation of its parent polymer chitin. It is present in green algae, the cell walls or fungi and in the exoskeleton of crustaceans. A novel procedure for preparing chitosan from shrimp shells was developed. The procedure involves two 10-minutes bleaching steps with ethanol after the usual demineralization and deproteinization processes. Before deacetylation, chitin was immersed in 12.5 M NaOH, cooled down and kept frozen for 24 h. The obtained chitosan was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV, X-ray diffraction (XRD) and viscosimetry. Samples of white chitosan with acetylation degrees below were obtained, as determined by FTIR and UV-first derivative spectroscopy. The change in the morphology of samples was followed by SEM. The ash content of chitosan samples were all below . Chitosan was soluble in acetic acid with insoluble contents of or less. XRD patterns exhibited the characteristic peaks of chitosan centered at 10 and 20 degrees in . The molecular weight of chitosan was between 2.3 and 2.8 g/mol. It is concluded that the procedure developed in the present work allowed obtaining chitosans with physical and chemical properties suitable for pharmaceutical applications.
Ni1−xFexO nanoparticles have been obtained by the co-precipitation chemical route. X-ray diffraction analyses using Rietveld refinement have shown a slight decrease in the microstrain and mean particle size as a function of the Fe content. The zero-field-cooling (ZFC) and field-cooling (FC) magnetization curves show superparamagnetic behavior at high temperatures and a low temperature peak (at T = 11 K), which is enhanced with increasing Fe concentration. Unusual behavior of the coercive field in the low temperature region and an exchange bias behavior were also observed. A decrease in the Fe concentration induces an increase in the exchange bias field. We argue that these behaviors can be linked with the strengthening of surface anisotropy caused by the incorporation of Fe ions.
17 July 2023 in ACS Sustainable Chemistry & Engineering
Polyethylene terephthalate (PET) is a ubiquitous polymer with a lack of viable waste management solutions besides mechanical recycling, incineration, and landfilling. Herein, we demonstrate a chemical upcycling of PET waste into materials for CO 2 capture via aminolysis. The aminolysis reaction products—a bis-aminoamide (BAETA) and oligomers—exhibit high CO 2 capture capacity up to 3.4 moles per kilogram as a stand-alone organic solid material. BAETA shows strong chemisorption featuring high selectivity for CO 2 capture from flue gas (5 to 20% CO 2 ) and ambient air (~400 parts per million CO 2 ) under humid conditions. Our thermally stable material (>250°C) enables CO 2 capture at high temperatures (up to 170°C) for multiple cycles. Scalability of the material production was demonstrated by performing aminolysis of untreated consumer waste PET of 1 kilogram. Our approach introduces a simple and straightforward solution that can address both plastic waste and carbon dioxide, offering a potential pathway toward net negative emissions.
We present a systematic study of the coercive field of CoFe2O4–SiO2 nanocomposites. The samples were prepared via the sol-gel method by using the Tetraethyl Orthosilicate as starting reagent. Results of X-ray diffraction, transmission electron microscopy, and X-ray fluorescence confirm the dispersion of the magnetic nanoparticles inside the silica matrix. In addition, the shift in the maximum of Zero-Field-Cooled curves observed by varying the weight ratio of CoFe2O4 nanoparticles to the precursor of silica is consistent with the increasing of average interparticle distances. Because our samples present a particle size distribution, we have used a generalized model which takes account such parameter to fit the experimental data of coercive field extracted from the magnetization curves as a function of applied field. Unlike most of the coercive field results reported in the literature for this material, the use of this model provided a successful description of the temperature dependence of the coercive field of CoFe2O4 nanoparticles in a wide temperature range. Surprisingly, we have observed the decreasing of the nanoparticles anisotropy constant in comparison to the bulk value expected for the material. We believe that this can be interpreted as due to both the migration of the Co2+ from octahedral to tetrahedral sites.