Soil contamination in the Panjiachong lead and zinc mining areas has become a severe problem in Hunan Province, China. As the traditional stabilization technology comes with soil degradation, it is urgent to find a novel binder that is more eco‐friendly. It has been proved that biochar can immobilize heavy metals, but limited research has been conducted on the contaminated soil with high concentration. In this study, 5%, 8%, and 10% biochar derived from the rice straw were used to remediate contaminated soil with high concentration of lead and zinc. Portland cement (PC) was adopted as the control group. The results showed that after 56 d curing, the biochar‐treated soil had a neutral pH and EC value and higher soil fertility compared with the PC‐treated soil. The results from the toxicity characteristic leaching procedure test indicated that the biochar is more effective than PC on heavy metal immobilization. Germination index (GI) value was used to evaluate the phytotoxicity of the treated soil; the GI values of treated soil with 8% and 10% biochar were both higher than 80%, while all the PC‐treated groups failed to achieve this GI value, which indicated the potential revegetation is applicable for the biochar‐treated soil.
Through loading tests on the steel‐reinforced high‐strength concrete deep beams (denoted as steel‐reinforced HSC deep beams), the influence of design parameters on the shear performance of deep beams is thoroughly analyzed. The design parameters include longitudinal reinforcement ratio ρs (0.67%, 1.05%, and 1.25%), horizontal reinforcement ratio ρsh (0.33%, 0.45%, and 0.50%), shear span‐to‐depth ratio λ (0.3, 0.6, and 0.9), and stirrup reinforcement ratio ρsv (0.25%, 0.33%, and 0.50%). Experimental observations focused on three key aspects (a) concrete surface crack evolution, (b) ultimate failure modes, and (c) shear failure progression to comprehensively understand deep beam shear mechanisms. Experimental results demonstrate that λ influences the shear behavior of test specimens. As the λ increases, the shear resistance decreases, whereas higher longitudinal reinforcement ratios improve shear capacity. Increasing the web reinforcement ratio suppresses formation of shear‐induced tensile cracks, thereby improving the shear resistance of deep beams. A nonlinear finite element analysis model was developed for deep beams, incorporating a concrete plastic damage constitutive model and a bilinear steel reinforcement model. The comparison of the calculation results shows that the maximum error in the bearing capacity of deep beams is 15.62%, and the average error is 7.59%. The numerical simulation results exhibit excellent correlation with experimental data, validating the reliability of the finite element approach in predicting the shear behavior of deep beams.