In this study, quaternary-ammonium-functionalized metal–organic frameworks (MOFs) Et-N-Cu(BDC-NH2)(DMF), were prepared, characterized, and applied for the highly effective removal of metal cyanide complexes, including Pd(CN)42−, Co(CN)63−, and Fe(CN)63−. Batch studies were carried out, and the maximum adsorption capacities of Pd(II), Co(III), and Fe(III) reached 172.9, 101.0, and 102.6, respectively. Adsorption was rapid, and equilibrium was established within 30 min. Et-N-Cu(BDC-NH2)(DMF) exhibited high thermal and chemical stability. Furthermore, absorbed Pd(CN)42− was selectively recovered by two-step elution. First, Co(CN)63− and Fe(CN)63− were eluted with a 1.5 mol L−1 KCl solution. Elution rates of Co(CN)63− and Fe(CN)63− were greater than 98.0%, whereas the elution percentage of Pd(CN)42− was less than 2.0%. Second, >97.0% Pd(CN)42− on the loaded MOFs was eluted using a 2.0 mol L−1 KI solution. The recovery rate of Pd(CN)42− was greater than 91.0% after five testing cycles. Adsorption isotherms, kinetics models, and adsorption thermodynamics of Pd(CN)42− on Et-N-Cu(BDC-NH2) (DMF) were also systematically investigated. The Et-N-Cu(BDC-NH2) (DMF) absorbent exhibited a rapid, excellent ability for the adsorption of metal cyanide complexes.
16 October 2024 in Separation and Purification Technology
In this study, novel polyaniline-3-amino-4-methoxybenzoic acid (PANI–AMB) copolymers were prepared and used as adsorbents for the separation and recovery of Pd(II) from a mixed solution containing Pt, Pd, and Rh. Batch sorption studies were carried out, and the main adsorption parameters were systematically investigated. Furthermore, the relevant thermodynamic parameters, isotherms, and kinetic models were also evaluated. Results revealed a high adsorption capacity of 278.5 mg g−1 for Pd(II). Separation factors βPd/Pt and βPd/Rh were 4.3 × 103 and 5.3 × 103, respectively. Results obtained from scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-vis), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) measurements indicated that the sorption of Pd(II) occurs mainly by chelation between Pd(II) and –NH–/–N/–COOH/–OCH3 and is accompanied by a redox mechanism involving the reduction of Pd(II) to Pd(0). The new PANI–AMB adsorbent showed efficient adsorption and separation of palladium from the leaching liquor of spent automotive catalysts, as well as good stability and reusability.
21 May 2024 in Separation and Purification Technology