As a very serious problem for control systems, actuator saturation often leads to an unstable system. The maneuvering flight of quadrotors may lead to actuator saturation, which commonly affects the flight quality, including trajectory-tracking accuracy. Quadrotors usually adopt double-closed-loop control, of which the outer loop is the position control used to calculate the desired attitude angle and the inner loop is the attitude control used to generate control actions for the vehicle. To address actuator saturation during the maneuvering flight of quadrotors, an attitude controller based on the conditioned super-twisting algorithm (CSTA) was designed. The sign functions in CSTA were replaced by a hyperbolic tangent function, which suppresses the chattering of CSTA. In order to improve the rapidity of the improved controller, the tanh-CSTA (TCSTA), a gain adjustment factor was utilized. The rapidity and smoothness of the controller can be satisfied by adjusting the gain factor. Additionally, a sliding surface was designed according to the characteristics of the quadrotor control structure, so that the TCSTA controller can be applied to the second-order system. The performances of the designed improved controller were simulated using MATLAB, and the results showed that the designed controller is more robust than the PID controller. Moreover, compared with the CSTA controller, the chattering of the designed controller was obviously suppressed without reducing the control accuracy.
To solve the problem with complex structure and low resource utilization of traditional target tracking UAV system based on visual guidance, this paper discusses an implementation method of quadrotor UAV target tracking system based on OpenMV. This system mainly includes flight control system and visual guidance system. TM4C123GH6PMI was selected as the control unit for flight control system. Six-axis motion sensor and digital magnetometer were combined into the pose measurement module. And ultrasonic sensor was selected to get the altitude information for drone. This system took OpenMV as the visual guidance system for target detection and position. For the real-time and accuracy requirements of the tracking system, the centroid-based tracking algorithm was used for calculating and resolving the target. The experiment results show that the system is stable and reliable.
This paper mainly studies the tracking control algorithm of self-designed desert planting robot, aiming to solve the tracking problem in the process of desert planting robot. In this paper, a trajectory tracking control algorithm based on model prediction is designed according to the kinematics model of the robot designed by ourselves. The MPC controller is used to combine the expected trajectory output turning Angle and the linear velocity of the robot. Then, an electronic differential distribution algorithm is used to calculate the linear velocities of the two rear wheels respectively. In order to prevent the error caused by sliding of the robot in the complex terrain, an ADRC controller is introduced to accurately control the driving wheels. As for the point tracking problem in the working process of the robot, firstly, transition points are introduced to solve the inaccessible problem caused by the turning radius of the robot. Then, from the perspective of motion planning, the point tracking problem of the mobile robot is transformed into the trajectory tracking problem between the initial position and the expected position by using the parametric trajectory generation method based on time polynomial. In order to verify the effectiveness of the proposed control algorithm, a full field experiment was carried out in wasteland. The experimental results show that the tracking accuracy of the proposed control algorithm in desert areas is up to 15cm, and the average tracking accuracy of simulated desert planting points ranges from 3.16cm to 12.65cm, which can meet the planting accuracy required by desert planting and has high application value.