Wire-based directed energy deposition (WDED) is an emerging additive manufacturing process garnering significant attention due to its potential for fabricating metal components with tailored mechanical and microstructural properties. This study reviews the WDED process, focusing on fabrication techniques, mechanical behaviors, microstructural characteristics, and quality enhancement methods. Utilizing data from the Web of Science, the study identifies leading countries in WDED research and highlights a growing interest in the field, particularly in materials engineering. Stainless steel, titanium, aluminum, and copper-based alloys are prominent materials for WDED applications. Furthermore, the study explores post-processing techniques such as machining, heat treatment, and surface finishing as integral steps for quality enhancement in WDED components.
In the current study, the integration of finite element simulation and machine learning is used to find the optimal combination of processing parameters in the directed energy deposition of SS316L. To achieve this, the FE simulation was validated against previously implemented research, and a series of simulations were conducted. Three inputs, namely laser power, scanning speed, and laser beam radius, and two outputs, namely residual stress and displacement, were considered. To run the machine learning model, artificial neural networks and a non-dominated sorting genetic algorithm were applied to determine the optimal combination of processing parameters. In addition, the current study underscores the novelty of combining FE simulation and machine learning methods, which provides enhanced precision and efficiency in controlling residual stress and displacement (geometrical deviation) in the Directed Energy Deposition (DED) process. Then, the results obtained via machine learning were validated with confirmatory tests and reported. The findings offer a practical solution for process parameter optimization, contributing to the progression of additive manufacturing technologies.
In the current study, the biocorrosion resistance and mechanical properties of the Ti–XAl–2Fe–3Cu (wt%) (X = 6, 4, 2 wt%) alloy produced by powder compact extrusion of blended elemental powders were optimized by using the response surface methodology in order to gain the best combination of processing parameters. To run the optimization process, central composite design with three equal levels of oxygen, hydrogen and aluminum was used and, by employing ANOVA, the analysis of variance was implemented. The results showed that the content of aluminum has a significant effect on the microstructure, mechanical properties, biocorrosion resistance and fracture behavior of the extruded rods. The highest aluminum content corresponds to the highest alloy strength and biocorrosion resistance. This was due to the reduction of the lamella thickness and of the material colonies as the aluminum content increases. Also, by running the experimental and optimization tests, the mechanical properties resulted 1245 MPa in yield strength and 1340 MPa in ultimate tensile strength with 0.1 µAcm−2 in corrosion current.