The kaolinite content is principally responsible for the durability performance of Limestone Calcined Clay Cement (LC3), which calls into question its global applicability. The clay supply has a significant impact on the LC3 system’s reduced carbon footprint advantage. The influence of kaolinite concentration from two separate clays (collected in East South-East Europe) on the durability performance of concrete was investigated in this study. The low-kaolinitic clay had 18% kaolinite, while the medium-kaolinitic clay contained around 41% kaolinite. The compressive strength, chloride intrusion, electrical conductivity, surface resistivity, and sorptivity index were measured on concrete after 28 days. Furthermore, the pore structure development of these mixtures was investigated in relation to the kaolinite content of the mixtures. The reactivity test was performed on clays to measure their reactivity levels within the cementitious system. The results show that kaolinite content has a moderate effect on compressive strength, but it has a considerable effect on other durability indices. When compared to the Portland cement mixture, the chloride migration and diffusion coefficients were reduced by 50% and 36%, respectively, in the combination with a medium kaolinite content (more than 40%). The low-kaolinitic clay, on the other hand, achieved 60% of the chloride penetration resistance of the medium-kaolinitic clay. Furthermore, low-kaolinitic clay has been demonstrated to be suitable for low-carbon concrete in moderate exposure conditions.
The aim of this study is to evaluate how much the changes in the concrete mix design, which enable carbon footprint reduction, are impacting mechanical properties and predicted service life of concrete structure. The starting point of this study was concrete mix used in a recent reinforced concrete Pelješac Bridge in the Adriatic. In the first round of experiments the amount of cement in this initial mix was significantly lowered, without jeopardising workability of the mix. In the second round, the main part of the cement was substituted with the combination of fly ash and limestone or calcined clay and limestone. All supplementary cementitious materials used were sourced in the region of the structure. The calcined clays used in this study were collected locally and found to have a low kaolin content. On all mixes fresh and mechanical properties were tested to ensure that the requested equal or better workability and mechanical stability were reached. Furthermore, on each mix chloride migration was tested to evaluate the resistance of mix to chloride penetration. All mixtures were evaluated based on the overall performance considering mechanical, durability, and carbon footprints. The results indicate that the total cement content had a significant effect on durability and thus service life. The bridge mix design was determined to be ‘over designed,’ as all alternative mixes achieved a similar or higher sustainability index with lower amount of cement.